Nexthor Aegis™ Paint Protection Film

Nexthor™ Ferrari Red SelfRepair Nano PPF Glossy

€1.799,00

Color Nexthor™ Ferrari Red SelfRepair Nano PPF Glossy

Length

15 m 17 m 20 m 30 m

Produktvarianten

Width: 1.52 m

Description

Ferrari Red Glossy PPF That Shields Your Paint From the Road

This Ferrari Red paint protection film absorbs rock chips, scratches, bug splatter, and road debris before they reach your factory paint. The 7.5 mil TPU film wraps body panels, hoods, bumpers, and mirrors in a transparent shield that stops damage without adding bulk. UV inhibitors prevent fading and oxidation, preserving the red finish year after year. This is self-healing paint protection film that works invisibly, maintaining the glossy red surface while your car faces highways, parking lots, and unpredictable weather.

SelfRepair™ Technology Erases Swirls and Light Scratches

The SelfRepair™ topcoat reacts to heat, erasing minor scratches and swirls within minutes. Park in sunlight or apply warm water, and the molecular structure realigns to restore a flawless glossy finish. This self-healing PPF eliminates the need for constant polishing or correction. Your Ferrari Red stays smooth and reflective, even after years of driving. The technology works continuously, protecting the colored PPF from the wear that dulls unprotected paint.

AquaGuard™ Hydrophilic Coating and BondGrip™ Adhesive

The AquaGuard™ hydrophilic nano coating spreads water into a thin sheet that lifts dirt and grime off the surface, keeping your Red PPF cleaner between washes. Unlike hydrophobic coatings that bead water, this hydrophilic coating creates a superior self-cleaning effect with no reapplication required. BondGrip™ adhesive from the USA locks the film to your paint without residue, allowing clean removal when needed. The system is backed by a 10-year warranty, guaranteeing long-term protection for your investment.

Order Nexthor™ Ferrari Red SelfRepair Nano PPF Glossy today and protect your car in the red that defines performance and passion.

Color & Effect

Ferrari Red explodes with the same intensity found on Maranello's most celebrated machines. This is <strong>the red that stops traffic</strong>, deep, saturated, and unapologetically bold. The glossy finish magnifies every curve and body line, creating reflections so sharp they rival liquid glass.

Under direct sunlight, the color ignites with a fiery brilliance that radiates passion and performance. In shadow or overcast conditions, the red deepens into a rich, luxurious tone that commands attention without screaming for it. Light dances across the glossy surface, highlighting every sculpted detail your car was designed to showcase.

This is the shade of racing heritage, exotic supercars, and drivers who refuse to blend in. Ferrari Red transforms any vehicle into <strong>a statement of confidence and speed</strong>, wrapped in a finish that stays flawless through every mile.

Performance & Protection

Nexthor™ PPF is engineered as a next-generation multilayer aliphatic TPU protection system optimized for impact resistance, optical clarity, and controlled elasticity at optimized thickness.

Multilayer Architecture
Nano-Coating	Hydrophilic surface layer engineered for long-term optical stability.
Self-Healing Topcoat	Heat-activated surface recovery designed for daily-use micro-marring.
Aliphatic TPU Core	High-strength core engineered for impact resistance and stretch stability.
Acrylic PSA Adhesive	Optically clear pressure-sensitive adhesive for controlled tack and edge hold.
Double-Matte Release Liner	Controlled release and dimensional stability during installation.

Core Performance Targets
Optical clarity	Engineered for a clean, distortion-minimized finish under real-world lighting.
Impact resistance	Designed to absorb and disperse stone-strike energy through the TPU core.
Elastic control	Balanced conformability for complex panels with stable shrink behavior.
Hydrophobic top surface	Low surface energy to reduce contamination bonding and improve washability.
Self-repair response	Heat-responsive polymer memory restores surface from light micro-scratches.

Warranty Coverage (Material)
Term	10-year material warranty
Coverage	Yellowing protection · crack & blister coverage · delamination protection · adhesive failure protection

For full measured values and tolerances, use the Technical Specifications tab.

Technical Specifications

Nexthor™ Paint Protection Film – Technical Specifications (AEGIS™ Mk I – 7.5 mil)
Optical & Surface
Gloss (60°)	≥ 94%
Water Contact Angle	≥ 103°
Anti-Fouling	Strongest marker (pass)
Yellowness Index	≤ 2
Mechanical Performance
Tensile Strength	≥ 360 kg/cm²
Elongation at Break	≥ 350%
Peel Strength	≥ 75 N/cm
Shrinkage (MD)	≤ 0.5 mm
Shrinkage (TD)	≤ 0.4 mm
Material Structure
Total Thickness	180 ± 5 μm
TPU Layer Thickness	150 ± 5 μm
Coating Thickness	10 ± 5 μm
Adhesive Thickness	20 ± 5 μm
Liner Thickness	75 ± 5 μm
Layer Thickness	50 ± 5 μm
Finished Weight	375–395 g/m²
Glue Weight	25–30 g/m²
Appearance Quality
Liner Bubbles	Visually invisible
Dust	Visually invisible
Coated Dump	Visually invisible
Glue Line	Visually invisible
Crystal Points (12.7 × 12.7 cm) – 0.1–0.6 mm	Allowed
Crystal Points (12.7 × 12.7 cm) – 0.7–2.9 mm	< 10
Crystal Points (12.7 × 12.7 cm) – ≥ 3.0 mm	1 max
Adhesion System
Adhesive Type	Optically clear acrylic PSA
Tack	≥ 9 N / 25 mm
24h, 180° Peel	≥ 18 N / 25 mm
Release Force	≤ 0.35 N / 25 mm
Thermal Resistance
Maximum Temperature	120°C (≥ 5 min)
Self-Repair Activation Range	60–80°C
Self-Repair Technology
Self-Healing	Heat 75°C, 0.1 mm (Brush & Heat)
Chemical Resistance
Acid & Alkali Resistance	PASS
Anti-Acid	Oxalate 72 (pass)
Storage & Warranty
Recommended Storage	22°C ± 2°C \| 40–60% RH \| store upright in original packaging, away from UV & heat
Shelf Life	12 months (stored upright in original packaging at 15–25°C and ~50% RH)
Material Warranty	10-year material warranty
Warranty Coverage	Yellowing protection, crack & blister coverage, delamination protection, adhesive failure protection

Protection Package

Precision outside. Innovation inside. Structured to maintain film integrity during handling and movement. Designed to reduce unnecessary stress, bending, and surface exposure before application.

Engineered to support stable transport, clean handling, and precise installation conditions.

Application & Installation

Nexthor™ Paint Protection Film is manufactured from premium American and German raw materials and engineered for maximum tensile strength, optical clarity, and controlled elasticity at optimized thickness. Correct installation ensures full adhesive activation, structural integrity, and long-term performance.

Professional Requirements

Installation must be performed in a controlled, dust-free environment using professional-grade tools. Surface contamination, improper slip ratios, or uncontrolled heat application may compromise adhesion performance.

Professional PPF squeegee (multi-hardness)
Precision blade system
Lint-free microfiber system
Distilled water only
Heat control equipment

Installation Methodology

Nexthor™ PPF is designed for precision wet application using controlled alignment, calibrated slip ratios, and structured adhesive activation. The following methodology ensures optimal bonding strength, visual clarity, and long-term durability.

1. Surface Conditioning

Vehicle surface must be fully decontaminated and panel temperature stabilized. Final wipe with isopropyl alcohol solution is mandatory. Surface must be clean, dry, oil-free, and dust-free.

2. Slip Formula

Recommended ratio: 1L distilled water + 2–4 drops pure baby shampoo. Mix gently to maintain low-foam consistency. No conditioners, waxes, or silicone-based additives permitted.

3. Film Positioning

Apply slip solution to both surface and adhesive layer. Position film under controlled tension. Maintain alignment with body lines and structural reference points.

4. Adhesive Activation

Execute center-out squeegee passes with overlapping pressure lines. All fluid must be evacuated to achieve full adhesive contact. Edges must be secured using controlled pressure and temperature. Avoid overheating.

5. Curing Phase

Initial bond stabilization: 24 hours.
Complete adhesive cure: 7–30 days depending on climate conditions.

During curing:
No washing for 48 hours.
No high-pressure exposure for 7 days.
Temporary moisture pockets may appear and will dissipate naturally.

Maintenance & Care

Nexthor™ PPF incorporates advanced self-healing elastomer technology activated by thermal energy. Wash with pH-neutral automotive shampoo only. Avoid abrasive tools and aggressive chemical exposure. Professional installation is strongly recommended for complex geometries and high-tension panels.

For the complete step-by-step documentation, technical notes, and extended installer guidance, please review the full Installation Guide:
View Full Nexthor™ Installation Guide

Nexthor™ | SKU: H-006-15m