Nexthor Aegis™ Paint Protection Film

McLaren Orange Glossy SelfRepair Nano-Coated PPF

€1.799,00

Color McLaren Orange Glossy SelfRepair Nano-Coated PPF

Length

15 m 17 m 20 m 30 m

Produktvarianten

Width: 1.52 m

Description

Orange Glossy PPF That Stops Rock Chips and Scratches

McLaren Orange Glossy SelfRepair Nano-Coated PPF shields your paint from rock chips, road debris, scratches, and UV damage. This 7.5 mil colored PPF combines impact resistance with optical clarity, protecting high-impact zones without altering the factory lines of your vehicle. The orange glossy finish transforms your car's appearance while the TPU film absorbs energy from stones and sharp objects that would otherwise chip your paint. Thin by design, this paint protection film installs with precision and maintains the sleek profile of modern bodywork.

SelfRepair Technology Erases Minor Scratches

The Nexthor SelfRepair™ topcoat uses heat-activated polymers to erase light scratches and swirl marks. Park under the sun or run warm water over the film, and surface damage disappears within minutes. This self-healing paint protection film keeps the orange glossy surface flawless through years of driving, eliminating the need for polishing or buffing. Scratches from car washes, fingernails, and light abrasions vanish automatically, maintaining the vibrant finish without constant maintenance.

Hydrophilic Nano Coating and Long-Term Adhesive Performance

Nexthor AquaGuard™ hydrophilic nano coating spreads water into a thin sheet that carries dirt and contaminants off the surface. Unlike hydrophobic coatings that bead water, this hydrophilic coating cleans more effectively and requires no reapplication. Nexthor BondGrip™ adhesive from the USA creates a permanent bond that resists edge lifting and peeling, even in extreme heat or cold. Both technologies are backed by a 10-year warranty, guaranteeing long-term protection for your Orange PPF investment.

Order McLaren Orange Glossy SelfRepair Nano-Coated PPF today and protect your car in a bold, high-gloss orange finish that stays pristine for a decade.

Color & Effect

McLaren Orange in a glossy finish captures the exact hue of the British supercar brand's signature racing color. Vivid, unapologetic orange with mirror-like reflectivity that amplifies every contour and body line. The gloss magnifies light, creating depth and intensity that shifts from bright tangerine in direct sun to rich burnt orange in shade.

This orange glossy finish replicates factory McLaren paint with flawless clarity. Light reflects cleanly off the surface, highlighting curves and creases without distortion. The color holds its saturation in all conditions, from overcast skies to desert heat.

Pure racing heritage in a single shade. The glossy topcoat keeps the orange vibrant and wet-looking, as if the car just rolled out of a show booth. No metallic flake, no pearl interference, just clean, high-impact orange gloss that demands attention on every street and track.

Performance & Protection

Nexthor™ PPF is engineered as a next-generation multilayer aliphatic TPU protection system optimized for impact resistance, optical clarity, and controlled elasticity at optimized thickness.

Multilayer Architecture
Nano-Coating	Hydrophilic surface layer engineered for long-term optical stability.
Self-Healing Topcoat	Heat-activated surface recovery designed for daily-use micro-marring.
Aliphatic TPU Core	High-strength core engineered for impact resistance and stretch stability.
Acrylic PSA Adhesive	Optically clear pressure-sensitive adhesive for controlled tack and edge hold.
Double-Matte Release Liner	Controlled release and dimensional stability during installation.

Core Performance Targets
Optical clarity	Engineered for a clean, distortion-minimized finish under real-world lighting.
Impact resistance	Designed to absorb and disperse stone-strike energy through the TPU core.
Elastic control	Balanced conformability for complex panels with stable shrink behavior.
Hydrophobic top surface	Low surface energy to reduce contamination bonding and improve washability.
Self-repair response	Heat-responsive polymer memory restores surface from light micro-scratches.

Warranty Coverage (Material)
Term	10-year material warranty
Coverage	Yellowing protection · crack & blister coverage · delamination protection · adhesive failure protection

For full measured values and tolerances, use the Technical Specifications tab.

Technical Specifications

Nexthor™ Paint Protection Film – Technical Specifications (AEGIS™ Mk I – 7.5 mil)
Optical & Surface
Gloss (60°)	≥ 94%
Water Contact Angle	≥ 103°
Anti-Fouling	Strongest marker (pass)
Yellowness Index	≤ 2
Mechanical Performance
Tensile Strength	≥ 360 kg/cm²
Elongation at Break	≥ 350%
Peel Strength	≥ 75 N/cm
Shrinkage (MD)	≤ 0.5 mm
Shrinkage (TD)	≤ 0.4 mm
Material Structure
Total Thickness	180 ± 5 μm
TPU Layer Thickness	150 ± 5 μm
Coating Thickness	10 ± 5 μm
Adhesive Thickness	20 ± 5 μm
Liner Thickness	75 ± 5 μm
Layer Thickness	50 ± 5 μm
Finished Weight	375–395 g/m²
Glue Weight	25–30 g/m²
Appearance Quality
Liner Bubbles	Visually invisible
Dust	Visually invisible
Coated Dump	Visually invisible
Glue Line	Visually invisible
Crystal Points (12.7 × 12.7 cm) – 0.1–0.6 mm	Allowed
Crystal Points (12.7 × 12.7 cm) – 0.7–2.9 mm	< 10
Crystal Points (12.7 × 12.7 cm) – ≥ 3.0 mm	1 max
Adhesion System
Adhesive Type	Optically clear acrylic PSA
Tack	≥ 9 N / 25 mm
24h, 180° Peel	≥ 18 N / 25 mm
Release Force	≤ 0.35 N / 25 mm
Thermal Resistance
Maximum Temperature	120°C (≥ 5 min)
Self-Repair Activation Range	60–80°C
Self-Repair Technology
Self-Healing	Heat 75°C, 0.1 mm (Brush & Heat)
Chemical Resistance
Acid & Alkali Resistance	PASS
Anti-Acid	Oxalate 72 (pass)
Storage & Warranty
Recommended Storage	22°C ± 2°C \| 40–60% RH \| store upright in original packaging, away from UV & heat
Shelf Life	12 months (stored upright in original packaging at 15–25°C and ~50% RH)
Material Warranty	10-year material warranty
Warranty Coverage	Yellowing protection, crack & blister coverage, delamination protection, adhesive failure protection

Protection Package

Precision outside. Innovation inside. Structured to maintain film integrity during handling and movement. Designed to reduce unnecessary stress, bending, and surface exposure before application.

Engineered to support stable transport, clean handling, and precise installation conditions.

Application & Installation

Nexthor™ Paint Protection Film is manufactured from premium American and German raw materials and engineered for maximum tensile strength, optical clarity, and controlled elasticity at optimized thickness. Correct installation ensures full adhesive activation, structural integrity, and long-term performance.

Professional Requirements

Installation must be performed in a controlled, dust-free environment using professional-grade tools. Surface contamination, improper slip ratios, or uncontrolled heat application may compromise adhesion performance.

Professional PPF squeegee (multi-hardness)
Precision blade system
Lint-free microfiber system
Distilled water only
Heat control equipment

Installation Methodology

Nexthor™ PPF is designed for precision wet application using controlled alignment, calibrated slip ratios, and structured adhesive activation. The following methodology ensures optimal bonding strength, visual clarity, and long-term durability.

1. Surface Conditioning

Vehicle surface must be fully decontaminated and panel temperature stabilized. Final wipe with isopropyl alcohol solution is mandatory. Surface must be clean, dry, oil-free, and dust-free.

2. Slip Formula

Recommended ratio: 1L distilled water + 2–4 drops pure baby shampoo. Mix gently to maintain low-foam consistency. No conditioners, waxes, or silicone-based additives permitted.

3. Film Positioning

Apply slip solution to both surface and adhesive layer. Position film under controlled tension. Maintain alignment with body lines and structural reference points.

4. Adhesive Activation

Execute center-out squeegee passes with overlapping pressure lines. All fluid must be evacuated to achieve full adhesive contact. Edges must be secured using controlled pressure and temperature. Avoid overheating.

5. Curing Phase

Initial bond stabilization: 24 hours.
Complete adhesive cure: 7–30 days depending on climate conditions.

During curing:
No washing for 48 hours.
No high-pressure exposure for 7 days.
Temporary moisture pockets may appear and will dissipate naturally.

Maintenance & Care

Nexthor™ PPF incorporates advanced self-healing elastomer technology activated by thermal energy. Wash with pH-neutral automotive shampoo only. Avoid abrasive tools and aggressive chemical exposure. Professional installation is strongly recommended for complex geometries and high-tension panels.

For the complete step-by-step documentation, technical notes, and extended installer guidance, please review the full Installation Guide:
View Full Nexthor™ Installation Guide

Nexthor™ | SKU: H-015-15m