Nexthor Aegis™ Paint Protection Film

GT Silver Liquid Metallic Glossy SelfRepair Nano-Coated PPF

€1.799,00

Color GT Silver Liquid Metallic Glossy SelfRepair Nano-Coated PPF

Length

15 m 17 m 20 m 30 m

Produktvarianten

Width: 1.52 m

Description

GT Silver Liquid Metallic Glossy PPF: Impact Protection That Won't Compromise Your Color

This 7.5 mil self-healing paint protection film stops rock chips, road debris, scratches, and UV damage before they reach your factory paint. GT Silver Liquid Metallic Glossy PPF absorbs impacts that would otherwise leave permanent marks on your panels. The glossy finish maintains the depth and clarity your paint deserves while adding a refined gray tone with subtle green-tinted undertones. Thinner by design, this colored PPF wraps complex curves without bulk, keeping your car's lines sharp and original. The thermoplastic urethane construction flexes under stress and returns to shape, protecting high-impact zones like hoods, fenders, bumpers, and mirrors.

SelfRepair™ Topcoat Erases Minor Scratches in Minutes

Surface scratches vanish when exposed to heat. Park in the sun or run warm water over the film, and the SelfRepair™ topcoat reflows to erase swirl marks, light abrasions, and wash-induced scratches. This self-healing paint protection film keeps your gray finish looking flawless without polishing or paint correction. The technology works continuously over the life of the film, so your car stays sharp year after year. Unlike standard PPF, SelfRepair™ responds faster and handles deeper scratches, giving you long-term protection that adapts to real-world driving.

AquaGuard™ Hydrophilic Nano Coating and BondGrip™ Adhesive for a Decade of Performance

The AquaGuard™ hydrophilic nano coating spreads water into a thin sheet that slides off your panels, carrying dirt, dust, and contaminants with it. No reapplication needed. This German-engineered surface stays cleaner between washes and resists staining from bugs, bird droppings, and tree sap. BondGrip™ adhesive from the USA locks the film in place without edge lift or bubbling, even in extreme heat or cold. Backed by a 10-year warranty, this scratch resistant PPF gives you a decade of rock chip protection and color enhancement.

Order GT Silver Liquid Metallic Glossy SelfRepair Nano-Coated PPF today and protect your car in a sophisticated gray with liquid metallic depth.

Color & Effect

GT Silver Liquid Metallic sits in the Gray family with a subtle green-tinted undertone that shifts depending on light angle. The glossy finish amplifies the liquid metallic effect, creating a molten silver appearance that flows across body panels. This is a sophisticated, understated gray that reads cooler and more technical than warm silvers. Under direct sunlight, the metallic particles ignite with a bright, almost icy shimmer. In shade or overcast conditions, the green shade emerges more prominently, giving the surface a refined, muted character.

The glossy layer adds wet-look depth, making the color appear denser and more dimensional than a standard silver. This color works on modern sports cars, luxury sedans, and electric vehicles where a restrained but dynamic aesthetic is key.

The liquid metallic effect creates movement without aggression, walking the line between stealth and statement. The finish flows with body contours, catching light in a way that emphasizes every curve and edge.

Performance & Protection

Nexthor™ PPF is engineered as a next-generation multilayer aliphatic TPU protection system optimized for impact resistance, optical clarity, and controlled elasticity at optimized thickness.

Multilayer Architecture
Nano-Coating	Hydrophilic surface layer engineered for long-term optical stability.
Self-Healing Topcoat	Heat-activated surface recovery designed for daily-use micro-marring.
Aliphatic TPU Core	High-strength core engineered for impact resistance and stretch stability.
Acrylic PSA Adhesive	Optically clear pressure-sensitive adhesive for controlled tack and edge hold.
Double-Matte Release Liner	Controlled release and dimensional stability during installation.

Core Performance Targets
Optical clarity	Engineered for a clean, distortion-minimized finish under real-world lighting.
Impact resistance	Designed to absorb and disperse stone-strike energy through the TPU core.
Elastic control	Balanced conformability for complex panels with stable shrink behavior.
Hydrophobic top surface	Low surface energy to reduce contamination bonding and improve washability.
Self-repair response	Heat-responsive polymer memory restores surface from light micro-scratches.

Warranty Coverage (Material)
Term	10-year material warranty
Coverage	Yellowing protection · crack & blister coverage · delamination protection · adhesive failure protection

For full measured values and tolerances, use the Technical Specifications tab.

Technical Specifications

Nexthor™ Paint Protection Film – Technical Specifications (AEGIS™ Mk I – 7.5 mil)
Optical & Surface
Gloss (60°)	≥ 94%
Water Contact Angle	≥ 103°
Anti-Fouling	Strongest marker (pass)
Yellowness Index	≤ 2
Mechanical Performance
Tensile Strength	≥ 360 kg/cm²
Elongation at Break	≥ 350%
Peel Strength	≥ 75 N/cm
Shrinkage (MD)	≤ 0.5 mm
Shrinkage (TD)	≤ 0.4 mm
Material Structure
Total Thickness	180 ± 5 μm
TPU Layer Thickness	150 ± 5 μm
Coating Thickness	10 ± 5 μm
Adhesive Thickness	20 ± 5 μm
Liner Thickness	75 ± 5 μm
Layer Thickness	50 ± 5 μm
Finished Weight	375–395 g/m²
Glue Weight	25–30 g/m²
Appearance Quality
Liner Bubbles	Visually invisible
Dust	Visually invisible
Coated Dump	Visually invisible
Glue Line	Visually invisible
Crystal Points (12.7 × 12.7 cm) – 0.1–0.6 mm	Allowed
Crystal Points (12.7 × 12.7 cm) – 0.7–2.9 mm	< 10
Crystal Points (12.7 × 12.7 cm) – ≥ 3.0 mm	1 max
Adhesion System
Adhesive Type	Optically clear acrylic PSA
Tack	≥ 9 N / 25 mm
24h, 180° Peel	≥ 18 N / 25 mm
Release Force	≤ 0.35 N / 25 mm
Thermal Resistance
Maximum Temperature	120°C (≥ 5 min)
Self-Repair Activation Range	60–80°C
Self-Repair Technology
Self-Healing	Heat 75°C, 0.1 mm (Brush & Heat)
Chemical Resistance
Acid & Alkali Resistance	PASS
Anti-Acid	Oxalate 72 (pass)
Storage & Warranty
Recommended Storage	22°C ± 2°C \| 40–60% RH \| store upright in original packaging, away from UV & heat
Shelf Life	12 months (stored upright in original packaging at 15–25°C and ~50% RH)
Material Warranty	10-year material warranty
Warranty Coverage	Yellowing protection, crack & blister coverage, delamination protection, adhesive failure protection

Protection Package

Precision outside. Innovation inside. Structured to maintain film integrity during handling and movement. Designed to reduce unnecessary stress, bending, and surface exposure before application.

Engineered to support stable transport, clean handling, and precise installation conditions.

Application & Installation

Nexthor™ Paint Protection Film is manufactured from premium American and German raw materials and engineered for maximum tensile strength, optical clarity, and controlled elasticity at optimized thickness. Correct installation ensures full adhesive activation, structural integrity, and long-term performance.

Professional Requirements

Installation must be performed in a controlled, dust-free environment using professional-grade tools. Surface contamination, improper slip ratios, or uncontrolled heat application may compromise adhesion performance.

Professional PPF squeegee (multi-hardness)
Precision blade system
Lint-free microfiber system
Distilled water only
Heat control equipment

Installation Methodology

Nexthor™ PPF is designed for precision wet application using controlled alignment, calibrated slip ratios, and structured adhesive activation. The following methodology ensures optimal bonding strength, visual clarity, and long-term durability.

1. Surface Conditioning

Vehicle surface must be fully decontaminated and panel temperature stabilized. Final wipe with isopropyl alcohol solution is mandatory. Surface must be clean, dry, oil-free, and dust-free.

2. Slip Formula

Recommended ratio: 1L distilled water + 2–4 drops pure baby shampoo. Mix gently to maintain low-foam consistency. No conditioners, waxes, or silicone-based additives permitted.

3. Film Positioning

Apply slip solution to both surface and adhesive layer. Position film under controlled tension. Maintain alignment with body lines and structural reference points.

4. Adhesive Activation

Execute center-out squeegee passes with overlapping pressure lines. All fluid must be evacuated to achieve full adhesive contact. Edges must be secured using controlled pressure and temperature. Avoid overheating.

5. Curing Phase

Initial bond stabilization: 24 hours.
Complete adhesive cure: 7–30 days depending on climate conditions.

During curing:
No washing for 48 hours.
No high-pressure exposure for 7 days.
Temporary moisture pockets may appear and will dissipate naturally.

Maintenance & Care

Nexthor™ PPF incorporates advanced self-healing elastomer technology activated by thermal energy. Wash with pH-neutral automotive shampoo only. Avoid abrasive tools and aggressive chemical exposure. Professional installation is strongly recommended for complex geometries and high-tension panels.

For the complete step-by-step documentation, technical notes, and extended installer guidance, please review the full Installation Guide:
View Full Nexthor™ Installation Guide

Nexthor™ | SKU: H-039-15m