Ochranná fólia laku Nexthor Aegis™

Volcano Gray Charm Glossy SelfRepair Nano-Coated PPF

€1.799,00

Farba: Silver to Purple

Dĺžka

15 m 17 m 20 m 30 m

Variácie

Šírka: 1,52 m

Popis

Fialová lesklá PPF, ktorá chráni váš lak pred každodenným poškodením

Strieborná až fialová lesklá PPF Silver to Purple Charm Gloss SelfRepair Nano-Coated PPF chráni vaše vozidlo pred kamienkami, škrabancami, UV žiarením a nečistotami z vozovky. Táto farebná ochranná fólia na lak s hrúbkou 7,5 mil kombinuje jasný tenký profil s vážnou odolnosťou proti nárazu. TPU fólia absorbuje energiu z nárazov štrku a škrabancov od konárov, pričom si zachováva bezchybný lesklý fialový povrch. Váš lak zostáva nedotknutý pod fóliou skonštruovanou tak, aby namiesto neho znášala nárazy.

Technológia SelfRepair aktivovaná teplom odstraňuje drobné škrabance

Vrchná vrstva Nexthor SelfRepair™ Topcoat automaticky eliminuje stopy po vírení a jemné škrabance. Zaparkujte svoje auto na slnku alebo použite teplú vodu a sledujte, ako poškodenie povrchu mizne, keď sa samoregeneračná ochranná fólia na lak obnoví svoj hladký povrch. Drobné odreniny, ktoré by trvalo poškodili tradičné fólie, zmiznú v priebehu niekoľkých minút, čím táto fialová PPF vyzerá rok čo rok ako čerstvo nainštalovaná.

Hydrofilný nano povlak a dlhodobý výkon lepidla

Hydrofilný nano povlak Nexthor AquaGuard™ Hydrophilic Nano Coating rozprestiera vodu do tenkej vrstvy, ktorá odstraňuje nečistoty z povrchu, čím sa z každého dažďa stáva čistiaci proces. Tento povlak nemeckej výroby vydrží celé obdobie 10-ročnej záruky bez opätovnej aplikácie. Lepidlo Nexthor BondGrip™ z USA udržuje fóliu pripevnenú k vášmu karosérii aj pri teplotných výkyvoch, umývaní áut a rýchlostiach na diaľnici. Hydrofóbny povlak je k dispozícii na požiadanie pre tých, ktorí preferujú perličkový efekt.

Objednajte si Silver to Purple Charm Gloss SelfRepair Nano-Coated PPF ešte dnes a chráňte svoje auto v meniacom sa fialovom odtieni, ktorý sa sám opravuje a zostane čistý po dobu desiatich rokov.

Farba a efekt

Táto lesklá fialová ochranná fólia na lak sa mení z jasnej striebornej pod priamym svetlom na tmavú, sýtu fialovú pri ostrejších uhloch. Metalická zmena farby vytvára dynamický vzhľad, ktorý sa mení pri chôdzi okolo vozidla, transformujúc sa z chladných strieborných odleskov pozdĺž línií karosérie na sýto fialovú na rovných paneloch.

Lesklý povrch zosilňuje prechod farieb, vytvárajúc ostré odrazy, ktoré zintenzívňujú strieborno-fialový gradient. Slnečné svetlo zvýrazňuje metalické častice suspendované vo fólii, čím dodáva hĺbku a rozmer krivkám a kontúram.

Za zamračeného počasia dominuje fialový tón so sofistikovaným, drahokamovým charakterom. Pod pouličnými lampami a za súmraku si fólia zachováva tajomný, chameleónsky charakter, vďaka ktorému auto vyzerá zakaždým inak.

Výkon a ochrana

Performance & Protection

Nexthor™ PPF is engineered as a next-generation multilayer aliphatic TPU protection system optimized for impact resistance, optical clarity, and controlled elasticity at optimized thickness.

Multilayer Architecture
Nano-Coating	Hydrophilic surface layer engineered for long-term optical stability.
Self-Healing Topcoat	Heat-activated surface recovery designed for daily-use micro-marring.
Aliphatic TPU Core	High-strength core engineered for impact resistance and stretch stability.
Acrylic PSA Adhesive	Optically clear pressure-sensitive adhesive for controlled tack and edge hold.
Double-Matte Release Liner	Controlled release and dimensional stability during installation.

Core Performance Targets
Optical clarity	Engineered for a clean, distortion-minimized finish under real-world lighting.
Impact resistance	Designed to absorb and disperse stone-strike energy through the TPU core.
Elastic control	Balanced conformability for complex panels with stable shrink behavior.
Hydrophobic top surface	Low surface energy to reduce contamination bonding and improve washability.
Self-repair response	Heat-responsive polymer memory restores surface from light micro-scratches.

Warranty Coverage (Material)
Term	10-year material warranty
Coverage	Yellowing protection · crack & blister coverage · delamination protection · adhesive failure protection

For full measured values and tolerances, use the Technical Specifications tab.

Technické špecifikácie

Nexthor™ Paint Protection Film – Technical Specifications (AEGIS™ Mk I – 7.5 mil)
Optical & Surface
Gloss (60°)	≥ 94%
Water Contact Angle	≥ 103°
Anti-Fouling	Strongest marker (pass)
Yellowness Index	≤ 2
Mechanical Performance
Tensile Strength	≥ 360 kg/cm²
Elongation at Break	≥ 350%
Peel Strength	≥ 75 N/cm
Shrinkage (MD)	≤ 0.5 mm
Shrinkage (TD)	≤ 0.4 mm
Material Structure
Total Thickness	180 ± 5 μm
TPU Layer Thickness	150 ± 5 μm
Coating Thickness	10 ± 5 μm
Adhesive Thickness	20 ± 5 μm
Liner Thickness	75 ± 5 μm
Layer Thickness	50 ± 5 μm
Finished Weight	375–395 g/m²
Glue Weight	25–30 g/m²
Appearance Quality
Liner Bubbles	Visually invisible
Dust	Visually invisible
Coated Dump	Visually invisible
Glue Line	Visually invisible
Crystal Points (12.7 × 12.7 cm) – 0.1–0.6 mm	Allowed
Crystal Points (12.7 × 12.7 cm) – 0.7–2.9 mm	< 10
Crystal Points (12.7 × 12.7 cm) – ≥ 3.0 mm	1 max
Adhesion System
Adhesive Type	Optically clear acrylic PSA
Tack	≥ 9 N / 25 mm
24h, 180° Peel	≥ 18 N / 25 mm
Release Force	≤ 0.35 N / 25 mm
Thermal Resistance
Maximum Temperature	120°C (≥ 5 min)
Self-Repair Activation Range	60–80°C
Self-Repair Technology
Self-Healing	Heat 75°C, 0.1 mm (Brush & Heat)
Chemical Resistance
Acid & Alkali Resistance	PASS
Anti-Acid	Oxalate 72 (pass)
Storage & Warranty
Recommended Storage	22°C ± 2°C \| 40–60% RH \| store upright in original packaging, away from UV & heat
Shelf Life	12 months (stored upright in original packaging at 15–25°C and ~50% RH)
Material Warranty	10-year material warranty
Warranty Coverage	Yellowing protection, crack & blister coverage, delamination protection, adhesive failure protection

Ochranný balík

Precíznosť zvonku. Inovácia zvnútra. Štruktúrované tak, aby sa zachovala integrita fólie počas manipulácie a pohybu. Navrhnuté tak, aby sa znížilo zbytočné namáhanie, ohýbanie a vystavenie povrchu pred aplikáciou.

Navrhnuté tak, aby podporovali stabilnú prepravu, čistú manipuláciu a presné podmienky inštalácie.

Aplikácia a inštalácia

Nexthor™ Paint Protection Film is manufactured from premium American and German raw materials and engineered for maximum tensile strength, optical clarity, and controlled elasticity at optimized thickness. Correct installation ensures full adhesive activation, structural integrity, and long-term performance.

Professional Requirements

Installation must be performed in a controlled, dust-free environment using professional-grade tools. Surface contamination, improper slip ratios, or uncontrolled heat application may compromise adhesion performance.

Professional PPF squeegee (multi-hardness)
Precision blade system
Lint-free microfiber system
Distilled water only
Heat control equipment

Installation Methodology

Nexthor™ PPF is designed for precision wet application using controlled alignment, calibrated slip ratios, and structured adhesive activation. The following methodology ensures optimal bonding strength, visual clarity, and long-term durability.

1. Surface Conditioning

Vehicle surface must be fully decontaminated and panel temperature stabilized. Final wipe with isopropyl alcohol solution is mandatory. Surface must be clean, dry, oil-free, and dust-free.

2. Slip Formula

Recommended ratio: 1L distilled water + 2–4 drops pure baby shampoo. Mix gently to maintain low-foam consistency. No conditioners, waxes, or silicone-based additives permitted.

3. Film Positioning

Apply slip solution to both surface and adhesive layer. Position film under controlled tension. Maintain alignment with body lines and structural reference points.

4. Adhesive Activation

Execute center-out squeegee passes with overlapping pressure lines. All fluid must be evacuated to achieve full adhesive contact. Edges must be secured using controlled pressure and temperature. Avoid overheating.

5. Curing Phase

Initial bond stabilization: 24 hours.
Complete adhesive cure: 7–30 days depending on climate conditions.

During curing:
No washing for 48 hours.
No high-pressure exposure for 7 days.
Temporary moisture pockets may appear and will dissipate naturally.

Maintenance & Care

Nexthor™ PPF incorporates advanced self-healing elastomer technology activated by thermal energy. Wash with pH-neutral automotive shampoo only. Avoid abrasive tools and aggressive chemical exposure. Professional installation is strongly recommended for complex geometries and high-tension panels.

For the complete step-by-step documentation, technical notes, and extended installer guidance, please review the full Installation Guide:
View Full Nexthor™ Installation Guide

Nexthor™ | SKU: H-088-15m