Nexthor Aegis™ Paint Protection Film

Dragon Blood Red Liquid Metallic Glossy SelfRepair Nano-Coated PPF

€1.799,00

Color Dragon Blood Red Liquid Metallic Glossy SelfRepair Nano-Coated PPF

Length

15 m 17 m 20 m 30 m

Produktvarianten

Width: 1.52 m

Description

Red Glossy PPF That Stops Rock Chips and Road Damage Cold

Dragon Blood Red paint protection film wraps your car in 7.5 mil of TPU armor that absorbs rock chips, scratches, and road debris before they reach your factory paint. This colored PPF shields vulnerable areas like hoods, fenders, mirrors, and bumpers from everything the road throws at you. UV inhibitors prevent sun damage and fading, keeping the red finish bold and saturated year after year. The glossy surface resists contamination from bug splatter, bird droppings, and tar, so your car stays cleaner longer. This is full-spectrum protection in a finish that transforms your vehicle's appearance.

SelfRepair Technology Erases Minor Scratches With Heat

The Nexthor SelfRepair™ topcoat eliminates light scratches and swirl marks automatically. Park under the sun or apply warm water, and the self-healing paint protection film reflows to erase surface damage. This keeps the glossy red finish flawless without polishing or buffing. Deeper protection comes from the film's impact-resistant TPU construction, which absorbs stone strikes and sharp debris that would otherwise chip your paint. Your car maintains showroom condition through daily driving, road trips, and harsh weather.

Hydrophilic Nano Coating and Permanent Adhesive Backed by a 10-Year Warranty

Nexthor AquaGuard™ hydrophilic nano coating spreads water into thin sheets that lift dirt and grime off the surface, making every wash faster and more effective. The hydrophilic coating requires no reapplication and lasts the life of the film. Nexthor BondGrip™ adhesive from the USA locks the film to your paint with permanent hold that won't lift, peel, or yellow. This red paint protection film is backed by a 10-year warranty covering delamination, discoloration, and cracking. Hydrophobic coating is available on request for those who prefer beading water behavior.

Order Dragon Blood Red Liquid Metallic Glossy SelfRepair Nano-Coated PPF today and protect your car in bold, saturated red that moves with the light.

Color & Effect

Dragon Blood Red pulls deep crimson tones from the paint beneath, then amplifies them with a liquid metallic sheen that moves across every body line. The glossy finish reflects light in tight, controlled highlights that sharpen curves and accentuate contours. Red stays rich and saturated under direct sun, then glows with molten intensity under street lamps and headlights. Metallic particles suspended in the film create a flowing, dimensional effect.

As angles shift, the surface ripples between bright scarlet and darker garnet tones. The glossy topcoat locks in clarity, so the red never looks flat or muted. This is aggressive red without compromise. Bold, saturated, and alive with motion.

The finish stays wet and glossy in all conditions, giving your car a presence that demands attention from every angle.

Performance & Protection

Nexthor™ PPF is engineered as a next-generation multilayer aliphatic TPU protection system optimized for impact resistance, optical clarity, and controlled elasticity at optimized thickness.

Multilayer Architecture
Nano-Coating	Hydrophilic surface layer engineered for long-term optical stability.
Self-Healing Topcoat	Heat-activated surface recovery designed for daily-use micro-marring.
Aliphatic TPU Core	High-strength core engineered for impact resistance and stretch stability.
Acrylic PSA Adhesive	Optically clear pressure-sensitive adhesive for controlled tack and edge hold.
Double-Matte Release Liner	Controlled release and dimensional stability during installation.

Core Performance Targets
Optical clarity	Engineered for a clean, distortion-minimized finish under real-world lighting.
Impact resistance	Designed to absorb and disperse stone-strike energy through the TPU core.
Elastic control	Balanced conformability for complex panels with stable shrink behavior.
Hydrophobic top surface	Low surface energy to reduce contamination bonding and improve washability.
Self-repair response	Heat-responsive polymer memory restores surface from light micro-scratches.

Warranty Coverage (Material)
Term	10-year material warranty
Coverage	Yellowing protection · crack & blister coverage · delamination protection · adhesive failure protection

For full measured values and tolerances, use the Technical Specifications tab.

Technical Specifications

Nexthor™ Paint Protection Film – Technical Specifications (AEGIS™ Mk I – 7.5 mil)
Optical & Surface
Gloss (60°)	≥ 94%
Water Contact Angle	≥ 103°
Anti-Fouling	Strongest marker (pass)
Yellowness Index	≤ 2
Mechanical Performance
Tensile Strength	≥ 360 kg/cm²
Elongation at Break	≥ 350%
Peel Strength	≥ 75 N/cm
Shrinkage (MD)	≤ 0.5 mm
Shrinkage (TD)	≤ 0.4 mm
Material Structure
Total Thickness	180 ± 5 μm
TPU Layer Thickness	150 ± 5 μm
Coating Thickness	10 ± 5 μm
Adhesive Thickness	20 ± 5 μm
Liner Thickness	75 ± 5 μm
Layer Thickness	50 ± 5 μm
Finished Weight	375–395 g/m²
Glue Weight	25–30 g/m²
Appearance Quality
Liner Bubbles	Visually invisible
Dust	Visually invisible
Coated Dump	Visually invisible
Glue Line	Visually invisible
Crystal Points (12.7 × 12.7 cm) – 0.1–0.6 mm	Allowed
Crystal Points (12.7 × 12.7 cm) – 0.7–2.9 mm	< 10
Crystal Points (12.7 × 12.7 cm) – ≥ 3.0 mm	1 max
Adhesion System
Adhesive Type	Optically clear acrylic PSA
Tack	≥ 9 N / 25 mm
24h, 180° Peel	≥ 18 N / 25 mm
Release Force	≤ 0.35 N / 25 mm
Thermal Resistance
Maximum Temperature	120°C (≥ 5 min)
Self-Repair Activation Range	60–80°C
Self-Repair Technology
Self-Healing	Heat 75°C, 0.1 mm (Brush & Heat)
Chemical Resistance
Acid & Alkali Resistance	PASS
Anti-Acid	Oxalate 72 (pass)
Storage & Warranty
Recommended Storage	22°C ± 2°C \| 40–60% RH \| store upright in original packaging, away from UV & heat
Shelf Life	12 months (stored upright in original packaging at 15–25°C and ~50% RH)
Material Warranty	10-year material warranty
Warranty Coverage	Yellowing protection, crack & blister coverage, delamination protection, adhesive failure protection

Protection Package

Precision outside. Innovation inside. Structured to maintain film integrity during handling and movement. Designed to reduce unnecessary stress, bending, and surface exposure before application.

Engineered to support stable transport, clean handling, and precise installation conditions.

Application & Installation

Nexthor™ Paint Protection Film is manufactured from premium American and German raw materials and engineered for maximum tensile strength, optical clarity, and controlled elasticity at optimized thickness. Correct installation ensures full adhesive activation, structural integrity, and long-term performance.

Professional Requirements

Installation must be performed in a controlled, dust-free environment using professional-grade tools. Surface contamination, improper slip ratios, or uncontrolled heat application may compromise adhesion performance.

Professional PPF squeegee (multi-hardness)
Precision blade system
Lint-free microfiber system
Distilled water only
Heat control equipment

Installation Methodology

Nexthor™ PPF is designed for precision wet application using controlled alignment, calibrated slip ratios, and structured adhesive activation. The following methodology ensures optimal bonding strength, visual clarity, and long-term durability.

1. Surface Conditioning

Vehicle surface must be fully decontaminated and panel temperature stabilized. Final wipe with isopropyl alcohol solution is mandatory. Surface must be clean, dry, oil-free, and dust-free.

2. Slip Formula

Recommended ratio: 1L distilled water + 2–4 drops pure baby shampoo. Mix gently to maintain low-foam consistency. No conditioners, waxes, or silicone-based additives permitted.

3. Film Positioning

Apply slip solution to both surface and adhesive layer. Position film under controlled tension. Maintain alignment with body lines and structural reference points.

4. Adhesive Activation

Execute center-out squeegee passes with overlapping pressure lines. All fluid must be evacuated to achieve full adhesive contact. Edges must be secured using controlled pressure and temperature. Avoid overheating.

5. Curing Phase

Initial bond stabilization: 24 hours.
Complete adhesive cure: 7–30 days depending on climate conditions.

During curing:
No washing for 48 hours.
No high-pressure exposure for 7 days.
Temporary moisture pockets may appear and will dissipate naturally.

Maintenance & Care

Nexthor™ PPF incorporates advanced self-healing elastomer technology activated by thermal energy. Wash with pH-neutral automotive shampoo only. Avoid abrasive tools and aggressive chemical exposure. Professional installation is strongly recommended for complex geometries and high-tension panels.

For the complete step-by-step documentation, technical notes, and extended installer guidance, please review the full Installation Guide:
View Full Nexthor™ Installation Guide

Nexthor™ | SKU: H-043-15m