Nexthor Aegis™ Paint Protection Film

White Diamond Purple Glossy SelfRepair Nano-Coated PPF

€1.799,00

Color White Diamond Purple Glossy SelfRepair Nano-Coated PPF

Length

15 m 17 m 20 m 30 m

Produktvarianten

Width: 1.52 m

Description

White Diamond Purple Glossy PPF Stops Rock Chips and Scratches

This 7.5 mil paint protection film shields your vehicle from rock chips, road debris, bug splatter, and UV damage. The glossy white finish with purple undertones protects light-colored paint while adding a dimensional color shift. White Diamond Purple Glossy PPF absorbs impacts that would otherwise chip or scratch your factory paint. The TPU film construction flexes under impact and disperses energy across the surface. Install it on high-impact zones like hoods, fenders, bumpers, and mirrors to preserve resale value and keep your car looking flawless.

SelfRepair™ Technology Erases Swirls and Light Scratches

The Nexthor SelfRepair™ topcoat eliminates minor scratches and swirl marks with heat activation. Park in the sun or run warm water over the film, and surface damage disappears within minutes. This self-healing paint protection film keeps the glossy white surface looking new even after years of driving. Light scratches from car washes, fingernails, or road grit vanish without polishing or buffing. The colored PPF maintains its clarity and shine without the maintenance hassles of traditional clear bra films.

AquaGuard™ Hydrophilic Nano Coating and BondGrip™ Adhesive

The German-engineered AquaGuard™ hydrophilic nano coating spreads water into thin sheets that carry dirt and grime off the surface. This hydrophilic coating requires no reapplication and stays active for the life of the film. Nexthor BondGrip™ adhesive from the USA locks the film to your paint without residue or paint damage upon removal. The entire system comes with a 10-year warranty covering yellowing, cracking, and peeling. Hydrophobic coating is available on request if you prefer beading water behavior.

Order White Diamond Purple Glossy SelfRepair Nano-Coated PPF today and protect your car with a color-shifting white paint protection film that heals itself and stays clean.

Color & Effect

White Diamond Purple combines a pure white base with subtle purple undertones that emerge under direct sunlight. The glossy finish reflects light with crystal clarity, creating a dimensional effect that shifts between bright white and soft violet depending on viewing angle. Under overcast skies or in shade, the film reads as a clean, glossy white with just a whisper of color. In full sun, the purple tones activate and catch the eye with a sophisticated shimmer.

The effect is restrained and elegant, never garish. The glossy surface amplifies light reflection and creates wet-look shine that enhances body lines. This color works beautifully on light-colored vehicles where the purple accent adds depth without overwhelming the original paint.

White Diamond Purple works particularly well on hoods, fenders, and mirrors where the color shift can be appreciated as you walk around the vehicle. The purple shimmer becomes more pronounced at angle changes, creating visual interest that transforms as light conditions change throughout the day.

Performance & Protection

Nexthor™ PPF is engineered as a next-generation multilayer aliphatic TPU protection system optimized for impact resistance, optical clarity, and controlled elasticity at optimized thickness.

Multilayer Architecture
Nano-Coating	Hydrophilic surface layer engineered for long-term optical stability.
Self-Healing Topcoat	Heat-activated surface recovery designed for daily-use micro-marring.
Aliphatic TPU Core	High-strength core engineered for impact resistance and stretch stability.
Acrylic PSA Adhesive	Optically clear pressure-sensitive adhesive for controlled tack and edge hold.
Double-Matte Release Liner	Controlled release and dimensional stability during installation.

Core Performance Targets
Optical clarity	Engineered for a clean, distortion-minimized finish under real-world lighting.
Impact resistance	Designed to absorb and disperse stone-strike energy through the TPU core.
Elastic control	Balanced conformability for complex panels with stable shrink behavior.
Hydrophobic top surface	Low surface energy to reduce contamination bonding and improve washability.
Self-repair response	Heat-responsive polymer memory restores surface from light micro-scratches.

Warranty Coverage (Material)
Term	10-year material warranty
Coverage	Yellowing protection · crack & blister coverage · delamination protection · adhesive failure protection

For full measured values and tolerances, use the Technical Specifications tab.

Technical Specifications

Nexthor™ Paint Protection Film – Technical Specifications (AEGIS™ Mk I – 7.5 mil)
Optical & Surface
Gloss (60°)	≥ 94%
Water Contact Angle	≥ 103°
Anti-Fouling	Strongest marker (pass)
Yellowness Index	≤ 2
Mechanical Performance
Tensile Strength	≥ 360 kg/cm²
Elongation at Break	≥ 350%
Peel Strength	≥ 75 N/cm
Shrinkage (MD)	≤ 0.5 mm
Shrinkage (TD)	≤ 0.4 mm
Material Structure
Total Thickness	180 ± 5 μm
TPU Layer Thickness	150 ± 5 μm
Coating Thickness	10 ± 5 μm
Adhesive Thickness	20 ± 5 μm
Liner Thickness	75 ± 5 μm
Layer Thickness	50 ± 5 μm
Finished Weight	375–395 g/m²
Glue Weight	25–30 g/m²
Appearance Quality
Liner Bubbles	Visually invisible
Dust	Visually invisible
Coated Dump	Visually invisible
Glue Line	Visually invisible
Crystal Points (12.7 × 12.7 cm) – 0.1–0.6 mm	Allowed
Crystal Points (12.7 × 12.7 cm) – 0.7–2.9 mm	< 10
Crystal Points (12.7 × 12.7 cm) – ≥ 3.0 mm	1 max
Adhesion System
Adhesive Type	Optically clear acrylic PSA
Tack	≥ 9 N / 25 mm
24h, 180° Peel	≥ 18 N / 25 mm
Release Force	≤ 0.35 N / 25 mm
Thermal Resistance
Maximum Temperature	120°C (≥ 5 min)
Self-Repair Activation Range	60–80°C
Self-Repair Technology
Self-Healing	Heat 75°C, 0.1 mm (Brush & Heat)
Chemical Resistance
Acid & Alkali Resistance	PASS
Anti-Acid	Oxalate 72 (pass)
Storage & Warranty
Recommended Storage	22°C ± 2°C \| 40–60% RH \| store upright in original packaging, away from UV & heat
Shelf Life	12 months (stored upright in original packaging at 15–25°C and ~50% RH)
Material Warranty	10-year material warranty
Warranty Coverage	Yellowing protection, crack & blister coverage, delamination protection, adhesive failure protection

Protection Package

Precision outside. Innovation inside. Structured to maintain film integrity during handling and movement. Designed to reduce unnecessary stress, bending, and surface exposure before application.

Engineered to support stable transport, clean handling, and precise installation conditions.

Application & Installation

Nexthor™ Paint Protection Film is manufactured from premium American and German raw materials and engineered for maximum tensile strength, optical clarity, and controlled elasticity at optimized thickness. Correct installation ensures full adhesive activation, structural integrity, and long-term performance.

Professional Requirements

Installation must be performed in a controlled, dust-free environment using professional-grade tools. Surface contamination, improper slip ratios, or uncontrolled heat application may compromise adhesion performance.

Professional PPF squeegee (multi-hardness)
Precision blade system
Lint-free microfiber system
Distilled water only
Heat control equipment

Installation Methodology

Nexthor™ PPF is designed for precision wet application using controlled alignment, calibrated slip ratios, and structured adhesive activation. The following methodology ensures optimal bonding strength, visual clarity, and long-term durability.

1. Surface Conditioning

Vehicle surface must be fully decontaminated and panel temperature stabilized. Final wipe with isopropyl alcohol solution is mandatory. Surface must be clean, dry, oil-free, and dust-free.

2. Slip Formula

Recommended ratio: 1L distilled water + 2–4 drops pure baby shampoo. Mix gently to maintain low-foam consistency. No conditioners, waxes, or silicone-based additives permitted.

3. Film Positioning

Apply slip solution to both surface and adhesive layer. Position film under controlled tension. Maintain alignment with body lines and structural reference points.

4. Adhesive Activation

Execute center-out squeegee passes with overlapping pressure lines. All fluid must be evacuated to achieve full adhesive contact. Edges must be secured using controlled pressure and temperature. Avoid overheating.

5. Curing Phase

Initial bond stabilization: 24 hours.
Complete adhesive cure: 7–30 days depending on climate conditions.

During curing:
No washing for 48 hours.
No high-pressure exposure for 7 days.
Temporary moisture pockets may appear and will dissipate naturally.

Maintenance & Care

Nexthor™ PPF incorporates advanced self-healing elastomer technology activated by thermal energy. Wash with pH-neutral automotive shampoo only. Avoid abrasive tools and aggressive chemical exposure. Professional installation is strongly recommended for complex geometries and high-tension panels.

For the complete step-by-step documentation, technical notes, and extended installer guidance, please review the full Installation Guide:
View Full Nexthor™ Installation Guide

Nexthor™ | SKU: H-038-15m