Nexthor Aegis™ Paint Protection Film

Satin Titan Olive SelfRepair Nano-Coated PPF

€1.799,00

Color Satin Titan Olive SelfRepair Nano-Coated PPF

Length

15 m 17 m 20 m 30 m

Produktvarianten

Width: 1.52 m

Description

Satin Gray PPF That Stops Rock Chips and Scratches Cold

Your paint faces relentless assault from road debris, rock chips, bug acid, and UV exposure. Satin Titan Olive SelfRepair Nano-Coated PPF is a 7.5 mil thermoplastic urethane film engineered to absorb impact and prevent damage before it reaches your clear coat. This colored paint protection film combines military-grade toughness with a refined satin finish that transforms your car's appearance while guarding every inch of covered surface. The thin profile ensures optical clarity and seamless edges, outperforming bulkier films that distort paint depth and create visible lines.

Self-Healing Paint Protection Film That Erases Minor Scratches

Light swirls and scratches vanish within minutes under sun heat or warm water. The SelfRepair™ topcoat uses heat-activated polymer memory to close surface abrasions automatically, keeping your satin gray finish flawless without polishing or buffing. This self-healing PPF responds to temperatures as low as 140°F, so even a warm afternoon reverses damage that would be permanent on unprotected paint. Park with confidence knowing your film rebounds from shopping cart dings, car wash brushes, and everyday contact.

Hydrophilic Nano Coating and American Adhesive Built to Last

The AquaGuard™ hydrophilic nano coating spreads water into a thin sheet that slides off with gravity, carrying dirt, mud, and contamination away without scrubbing. Unlike hydrophobic coatings that bead and leave residue, this German-engineered surface stays cleaner between washes and never requires reapplication. BondGrip™ adhesive from the USA ensures permanent grip without yellowing or peeling, backed by a 10-year warranty that covers the film, coating, and bond integrity. This scratch resistant paint protection film handles extreme heat, freezing cold, and salt exposure without degradation.

Order Satin Titan Olive SelfRepair Nano-Coated PPF today and protect your car in a refined gray finish that heals itself and stays cleaner longer.

Color & Effect

Satin Titan Olive transforms your paint into a muted, military-inspired gray with warm olive undertones that shift subtly depending on light angle. The satin finish diffuses reflections into a smooth, even glow rather than sharp highlights, giving your car a stealthy, understated presence that reads sophisticated instead of flashy.

In direct sunlight, the olive undertones emerge as a greenish-gray patina that adds depth and complexity. Under overcast skies or in shade, the film settles into a neutral gray with a velvety texture that absorbs ambient light. The color works across modern and classic body lines, complementing chrome, black trim, and bronze or gunmetal wheels without clashing.

The satin surface eliminates glare and fingerprint visibility while maintaining rich color saturation. This finish reads tactical and purposeful, suited to drivers who want subdued aggression rather than mirror shine. Titan Olive sits between traditional gray and modern earth tones, bridging utility and refinement in a single wrap-like color.

Performance & Protection

Nexthor™ PPF is engineered as a next-generation multilayer aliphatic TPU protection system optimized for impact resistance, optical clarity, and controlled elasticity at optimized thickness.

Multilayer Architecture
Nano-Coating	Hydrophilic surface layer engineered for long-term optical stability.
Self-Healing Topcoat	Heat-activated surface recovery designed for daily-use micro-marring.
Aliphatic TPU Core	High-strength core engineered for impact resistance and stretch stability.
Acrylic PSA Adhesive	Optically clear pressure-sensitive adhesive for controlled tack and edge hold.
Double-Matte Release Liner	Controlled release and dimensional stability during installation.

Core Performance Targets
Optical clarity	Engineered for a clean, distortion-minimized finish under real-world lighting.
Impact resistance	Designed to absorb and disperse stone-strike energy through the TPU core.
Elastic control	Balanced conformability for complex panels with stable shrink behavior.
Hydrophobic top surface	Low surface energy to reduce contamination bonding and improve washability.
Self-repair response	Heat-responsive polymer memory restores surface from light micro-scratches.

Warranty Coverage (Material)
Term	10-year material warranty
Coverage	Yellowing protection · crack & blister coverage · delamination protection · adhesive failure protection

For full measured values and tolerances, use the Technical Specifications tab.

Technical Specifications

Nexthor™ Paint Protection Film – Technical Specifications (AEGIS™ Mk I – 7.5 mil)
Optical & Surface
Gloss (60°)	≥ 94%
Water Contact Angle	≥ 103°
Anti-Fouling	Strongest marker (pass)
Yellowness Index	≤ 2
Mechanical Performance
Tensile Strength	≥ 360 kg/cm²
Elongation at Break	≥ 350%
Peel Strength	≥ 75 N/cm
Shrinkage (MD)	≤ 0.5 mm
Shrinkage (TD)	≤ 0.4 mm
Material Structure
Total Thickness	180 ± 5 μm
TPU Layer Thickness	150 ± 5 μm
Coating Thickness	10 ± 5 μm
Adhesive Thickness	20 ± 5 μm
Liner Thickness	75 ± 5 μm
Layer Thickness	50 ± 5 μm
Finished Weight	375–395 g/m²
Glue Weight	25–30 g/m²
Appearance Quality
Liner Bubbles	Visually invisible
Dust	Visually invisible
Coated Dump	Visually invisible
Glue Line	Visually invisible
Crystal Points (12.7 × 12.7 cm) – 0.1–0.6 mm	Allowed
Crystal Points (12.7 × 12.7 cm) – 0.7–2.9 mm	< 10
Crystal Points (12.7 × 12.7 cm) – ≥ 3.0 mm	1 max
Adhesion System
Adhesive Type	Optically clear acrylic PSA
Tack	≥ 9 N / 25 mm
24h, 180° Peel	≥ 18 N / 25 mm
Release Force	≤ 0.35 N / 25 mm
Thermal Resistance
Maximum Temperature	120°C (≥ 5 min)
Self-Repair Activation Range	60–80°C
Self-Repair Technology
Self-Healing	Heat 75°C, 0.1 mm (Brush & Heat)
Chemical Resistance
Acid & Alkali Resistance	PASS
Anti-Acid	Oxalate 72 (pass)
Storage & Warranty
Recommended Storage	22°C ± 2°C \| 40–60% RH \| store upright in original packaging, away from UV & heat
Shelf Life	12 months (stored upright in original packaging at 15–25°C and ~50% RH)
Material Warranty	10-year material warranty
Warranty Coverage	Yellowing protection, crack & blister coverage, delamination protection, adhesive failure protection

Protection Package

Precision outside. Innovation inside. Structured to maintain film integrity during handling and movement. Designed to reduce unnecessary stress, bending, and surface exposure before application.

Engineered to support stable transport, clean handling, and precise installation conditions.

Application & Installation

Nexthor™ Paint Protection Film is manufactured from premium American and German raw materials and engineered for maximum tensile strength, optical clarity, and controlled elasticity at optimized thickness. Correct installation ensures full adhesive activation, structural integrity, and long-term performance.

Professional Requirements

Installation must be performed in a controlled, dust-free environment using professional-grade tools. Surface contamination, improper slip ratios, or uncontrolled heat application may compromise adhesion performance.

Professional PPF squeegee (multi-hardness)
Precision blade system
Lint-free microfiber system
Distilled water only
Heat control equipment

Installation Methodology

Nexthor™ PPF is designed for precision wet application using controlled alignment, calibrated slip ratios, and structured adhesive activation. The following methodology ensures optimal bonding strength, visual clarity, and long-term durability.

1. Surface Conditioning

Vehicle surface must be fully decontaminated and panel temperature stabilized. Final wipe with isopropyl alcohol solution is mandatory. Surface must be clean, dry, oil-free, and dust-free.

2. Slip Formula

Recommended ratio: 1L distilled water + 2–4 drops pure baby shampoo. Mix gently to maintain low-foam consistency. No conditioners, waxes, or silicone-based additives permitted.

3. Film Positioning

Apply slip solution to both surface and adhesive layer. Position film under controlled tension. Maintain alignment with body lines and structural reference points.

4. Adhesive Activation

Execute center-out squeegee passes with overlapping pressure lines. All fluid must be evacuated to achieve full adhesive contact. Edges must be secured using controlled pressure and temperature. Avoid overheating.

5. Curing Phase

Initial bond stabilization: 24 hours.
Complete adhesive cure: 7–30 days depending on climate conditions.

During curing:
No washing for 48 hours.
No high-pressure exposure for 7 days.
Temporary moisture pockets may appear and will dissipate naturally.

Maintenance & Care

Nexthor™ PPF incorporates advanced self-healing elastomer technology activated by thermal energy. Wash with pH-neutral automotive shampoo only. Avoid abrasive tools and aggressive chemical exposure. Professional installation is strongly recommended for complex geometries and high-tension panels.

For the complete step-by-step documentation, technical notes, and extended installer guidance, please review the full Installation Guide:
View Full Nexthor™ Installation Guide

Nexthor™ | SKU: N-19-15m