Ochranná fólia laku Nexthor Aegis™
Volcano Gray Glossy SelfRepair Nano-Coated PPF
Volcano Gray Glossy SelfRepair Nano-Coated PPF - 1,52 x 15 m / Štandardných 7,5 mil (≈190 μm) / Volcano Gray je momentálne vypredaný a bude odoslaný po naskladnení.
Šírka: 1,52 m
Nepodarilo sa načítať dostupnosť osobného odberu
Popis
Popis
Sivá lesklá PPF fólia, ktorá chráni váš lak pred poškodením z ciest
Vulkanická sivá lesklá PPF fólia SelfRepair s nano-povlakom chráni vaše vozidlo pred kamienkami, škrabancami, UV degradáciou a úlomkami z cesty. Táto 7,5 mil TPU fólia obaľuje kritické oblasti ako kapoty, nárazníky, blatníky a zrkadlá do ochrannej vrstvy, ktorá absorbuje nárazy bez kompromitovania elegantného vzhľadu vášho auta. Sivá ochranná fólia na lak udržuje továrenskú čírosť a zároveň dodáva vlastnú povrchovú úpravu, ktorá vynikne na ceste. Tenký profil sa čisto inštaluje a odoláva zdvíhaniu hrán pre dlhodobý výkon.
Technológia SelfRepair eliminuje drobné škrabance teplom
Vrchná vrstva Nexthor SelfRepair™ reaguje na teplo zo slnečného svetla alebo teplej vody, čo spôsobuje, že drobné škrabance a kruhové stopy zmiznú v priebehu niekoľkých minút. Táto samoopravná ochranná fólia na lak udrží váš sivý povrch bezchybný počas každodennej jazdy, stretnutí na parkovisku a automatických umývačiek áut. Škrabance, ktoré by trvalo poškodili nechránený lak, zmiznú z povrchu a zachovajú lesklý vzhľad rok čo rok. Vaše auto zostane pripravené na autosalón bez neustáleho detailovania.
Hydrofilný nano povlak AquaGuard a lepidlo BondGrip
Hydrofilný nano povlak Nexthor AquaGuard™ rozprestiera vodu do tenkej vrstvy, ktorá odvádza nečistoty a kontaminanty z povrchu, čím udržuje vašu farebnú PPF fóliu čistejšiu medzi umývaniami. Tento povlak, vyvinutý v Nemecku, vydrží po celú životnosť fólie bez potreby opätovnej aplikácie. Lepidlo Nexthor BondGrip™ z USA vytvára bezpečné spojenie, ktoré nezažltne, neodlepí sa ani nezanechá zvyšky po odstránení. S 10-ročnou zárukou táto ochranná fólia na lak chráni vašu investíciu s preukázanou trvanlivosťou.
Objednajte si vulkanickú sivú lesklú PPF fóliu SelfRepair s nano-povlakom ešte dnes a chráňte svoje auto vlastnou sivou povrchovou úpravou, ktorá sa sama opravuje a zostáva čistá.
Farba a efekt
Farba a efekt
Výkon a ochrana
Výkon a ochrana
Performance & Protection
Nexthor™ PPF is engineered as a next-generation multilayer aliphatic TPU protection system optimized for impact resistance, optical clarity, and controlled elasticity at optimized thickness.
| Multilayer Architecture | |
|---|---|
| Nano-Coating | Hydrophilic surface layer engineered for long-term optical stability. |
| Self-Healing Topcoat | Heat-activated surface recovery designed for daily-use micro-marring. |
| Aliphatic TPU Core | High-strength core engineered for impact resistance and stretch stability. |
| Acrylic PSA Adhesive | Optically clear pressure-sensitive adhesive for controlled tack and edge hold. |
| Double-Matte Release Liner | Controlled release and dimensional stability during installation. |
| Core Performance Targets | |
|---|---|
| Optical clarity | Engineered for a clean, distortion-minimized finish under real-world lighting. |
| Impact resistance | Designed to absorb and disperse stone-strike energy through the TPU core. |
| Elastic control | Balanced conformability for complex panels with stable shrink behavior. |
| Hydrophobic top surface | Low surface energy to reduce contamination bonding and improve washability. |
| Self-repair response | Heat-responsive polymer memory restores surface from light micro-scratches. |
| Warranty Coverage (Material) | |
|---|---|
| Term | 10-year material warranty |
| Coverage | Yellowing protection · crack & blister coverage · delamination protection · adhesive failure protection |
For full measured values and tolerances, use the Technical Specifications tab.
Technické špecifikácie
Technické špecifikácie
| Nexthor™ Paint Protection Film – Technical Specifications (AEGIS™ Mk I – 7.5 mil) | |
|---|---|
| Optical & Surface | |
| Gloss (60°) | ≥ 94% |
| Water Contact Angle | ≥ 103° |
| Anti-Fouling | Strongest marker (pass) |
| Yellowness Index | ≤ 2 |
| Mechanical Performance | |
| Tensile Strength | ≥ 360 kg/cm² |
| Elongation at Break | ≥ 350% |
| Peel Strength | ≥ 75 N/cm |
| Shrinkage (MD) | ≤ 0.5 mm |
| Shrinkage (TD) | ≤ 0.4 mm |
| Material Structure | |
| Total Thickness | 180 ± 5 μm |
| TPU Layer Thickness | 150 ± 5 μm |
| Coating Thickness | 10 ± 5 μm |
| Adhesive Thickness | 20 ± 5 μm |
| Liner Thickness | 75 ± 5 μm |
| Layer Thickness | 50 ± 5 μm |
| Finished Weight | 375–395 g/m² |
| Glue Weight | 25–30 g/m² |
| Appearance Quality | |
| Liner Bubbles | Visually invisible |
| Dust | Visually invisible |
| Coated Dump | Visually invisible |
| Glue Line | Visually invisible |
| Crystal Points (12.7 × 12.7 cm) – 0.1–0.6 mm | Allowed |
| Crystal Points (12.7 × 12.7 cm) – 0.7–2.9 mm | < 10 |
| Crystal Points (12.7 × 12.7 cm) – ≥ 3.0 mm | 1 max |
| Adhesion System | |
| Adhesive Type | Optically clear acrylic PSA |
| Tack | ≥ 9 N / 25 mm |
| 24h, 180° Peel | ≥ 18 N / 25 mm |
| Release Force | ≤ 0.35 N / 25 mm |
| Thermal Resistance | |
| Maximum Temperature | 120°C (≥ 5 min) |
| Self-Repair Activation Range | 60–80°C |
| Self-Repair Technology | |
| Self-Healing | Heat 75°C, 0.1 mm (Brush & Heat) |
| Chemical Resistance | |
| Acid & Alkali Resistance | PASS |
| Anti-Acid | Oxalate 72 (pass) |
| Storage & Warranty | |
| Recommended Storage | 22°C ± 2°C | 40–60% RH | store upright in original packaging, away from UV & heat |
| Shelf Life | 12 months (stored upright in original packaging at 15–25°C and ~50% RH) |
| Material Warranty | 10-year material warranty |
| Warranty Coverage | Yellowing protection, crack & blister coverage, delamination protection, adhesive failure protection |
Ochranný balík
Ochranný balík
Precíznosť zvonku. Inovácia zvnútra. Štruktúrované tak, aby sa zachovala integrita fólie počas manipulácie a pohybu. Navrhnuté tak, aby sa znížilo zbytočné namáhanie, ohýbanie a vystavenie povrchu pred aplikáciou.
Navrhnuté tak, aby podporovali stabilnú prepravu, čistú manipuláciu a presné podmienky inštalácie.
Aplikácia a inštalácia
Aplikácia a inštalácia
Nexthor™ Paint Protection Film is manufactured from premium American and German raw materials and engineered for maximum tensile strength, optical clarity, and controlled elasticity at optimized thickness. Correct installation ensures full adhesive activation, structural integrity, and long-term performance.
Professional Requirements
Installation must be performed in a controlled, dust-free environment using professional-grade tools. Surface contamination, improper slip ratios, or uncontrolled heat application may compromise adhesion performance.
- Professional PPF squeegee (multi-hardness)
- Precision blade system
- Lint-free microfiber system
- Distilled water only
- Heat control equipment
Installation Methodology
Nexthor™ PPF is designed for precision wet application using controlled alignment, calibrated slip ratios, and structured adhesive activation. The following methodology ensures optimal bonding strength, visual clarity, and long-term durability.
1. Surface ConditioningVehicle surface must be fully decontaminated and panel temperature stabilized. Final wipe with isopropyl alcohol solution is mandatory. Surface must be clean, dry, oil-free, and dust-free.
2. Slip FormulaRecommended ratio: 1L distilled water + 2–4 drops pure baby shampoo. Mix gently to maintain low-foam consistency. No conditioners, waxes, or silicone-based additives permitted.
3. Film PositioningApply slip solution to both surface and adhesive layer. Position film under controlled tension. Maintain alignment with body lines and structural reference points.
4. Adhesive ActivationExecute center-out squeegee passes with overlapping pressure lines. All fluid must be evacuated to achieve full adhesive contact. Edges must be secured using controlled pressure and temperature. Avoid overheating.
5. Curing Phase
Initial bond stabilization: 24 hours.
Complete adhesive cure: 7–30 days depending on climate conditions.
During curing:
No washing for 48 hours.
No high-pressure exposure for 7 days.
Temporary moisture pockets may appear and will dissipate naturally.
Maintenance & Care
Nexthor™ PPF incorporates advanced self-healing elastomer technology activated by thermal energy. Wash with pH-neutral automotive shampoo only. Avoid abrasive tools and aggressive chemical exposure. Professional installation is strongly recommended for complex geometries and high-tension panels.
For the complete step-by-step documentation, technical notes, and extended installer guidance, please review the full Installation Guide:
View Full Nexthor™ Installation Guide
Volcano Gray Glossy SelfRepair Nano-Coated PPF