Ochranná fólia laku Nexthor Aegis™

São Paulo Glossy SelfRepair Nano-Coated PPF

€1.799,00

Farba: São Paulo

Dĺžka

15 m 17 m 20 m 30 m

Variácie

Šírka: 1,52 m

Popis

Žltá lesklá PPF, ktorá chráni váš lak pred cestou

São Paulo Glossy chráni povrch vášho auta pred kamienkami, škrabancami, UV degradáciou a nečistotami z cesty. Táto 7,5 mil farebná ochranná fólia na lak používa tenkú, opticky priehľadnú TPU konštrukciu, ktorá zastaví poškodenie skôr, ako sa dostane k vášmu laku. Žltý lesklý povrch transformuje vaše vozidlo pri zachovaní plnej ochrany v oblastiach s vysokým nárazom, ako sú kapoty, blatníky a nárazníky. Táto fólia, tenká svojím dizajnom, sa inštaluje s lepšou jasnosťou a rafinovanejším vzhľadom ako objemnejšie alternatívy.

Technológia SelfRepair vymaže drobné škrabance

Vrchná vrstva Nexthor SelfRepair™ využíva tepelne aktivované polyméry na automatické odstránenie drobných škrabancov a kruhových škrabancov. Zaparkujte na slnku alebo prelejte povrch teplou vodou a samoliečiaca PPF sa vráti do pôvodného hladkého stavu. Táto samoliečiaca ochranná fólia na lak udržuje váš žltý lesklý povrch bezchybný bez neustálej korekcie alebo opätovnej aplikácie.

Hydrofilná nano vrstva a dlhodobá priľnavosť

Hydrofilná nano vrstva Nexthor AquaGuard™ rozprestiera vodu do tenkej vrstvy, ktorá odvádza nečistoty a kontaminanty z povrchu. Na rozdiel od hydrofóbnych vrstiev, ktoré vytvárajú kvapky vody, tento nemecký systém sa samočistí efektívnejšie a nikdy nepotrebuje opätovnú aplikáciu. Lepidlo Nexthor BondGrip™ z USA vytvára trvalé spojenie, ktoré sa neodlepí, nezažltne ani sa neodlúpne. Podporené 10-ročnou zárukou, táto žltá ochranná fólia na lak si udržuje svoju jasnosť a ochranný výkon po celú dobu vášho vlastníctva.

Objednajte si São Paulo Glossy SelfRepair Nano-Coated PPF ešte dnes a ochráňte svoje auto v odvážnom žltom lesku.

Farba a efekt

São Paulo Glossy premení vaše vozidlo na žiarivo žltú farbu, ktorá odráža svetlo s vysokým leskom a čistotou. Žltý odtieň pôsobí výrazne a sýto na priamom slnečnom svetle, zatiaľ čo v tieni zjemnie do teplého jasu. Odrazy sa čisto pohybujú po lesklom povrchu, zvýrazňujúc línie a krivky karosérie s ostrou, zrkadlovou presnosťou.

Táto základná farba vytvára energický a sebavedomý vzhľad bez toho, aby preťažila pôvodný dizajn vozidla. Lesklý vrchný náter zintenzívňuje hĺbku a sýtosť, vďaka čomu sa žltá javí bohatšie a dynamickejšie ako matné alebo saténové alternatívy.

Pod umelým osvetlením si žltá zachováva svoj skutočný odtieň s minimálnym posunom farieb. Povrchová úprava zostáva konzistentná na všetkých paneloch, čím vytvára jednotný vzhľad továrenskej kvality, ktorý zlepšuje prítomnosť každého auta na ceste.

Výkon a ochrana

Performance & Protection

Nexthor™ PPF is engineered as a next-generation multilayer aliphatic TPU protection system optimized for impact resistance, optical clarity, and controlled elasticity at optimized thickness.

Multilayer Architecture
Nano-Coating	Hydrophilic surface layer engineered for long-term optical stability.
Self-Healing Topcoat	Heat-activated surface recovery designed for daily-use micro-marring.
Aliphatic TPU Core	High-strength core engineered for impact resistance and stretch stability.
Acrylic PSA Adhesive	Optically clear pressure-sensitive adhesive for controlled tack and edge hold.
Double-Matte Release Liner	Controlled release and dimensional stability during installation.

Core Performance Targets
Optical clarity	Engineered for a clean, distortion-minimized finish under real-world lighting.
Impact resistance	Designed to absorb and disperse stone-strike energy through the TPU core.
Elastic control	Balanced conformability for complex panels with stable shrink behavior.
Hydrophobic top surface	Low surface energy to reduce contamination bonding and improve washability.
Self-repair response	Heat-responsive polymer memory restores surface from light micro-scratches.

Warranty Coverage (Material)
Term	10-year material warranty
Coverage	Yellowing protection · crack & blister coverage · delamination protection · adhesive failure protection

For full measured values and tolerances, use the Technical Specifications tab.

Technické špecifikácie

Nexthor™ Paint Protection Film – Technical Specifications (AEGIS™ Mk I – 7.5 mil)
Optical & Surface
Gloss (60°)	≥ 94%
Water Contact Angle	≥ 103°
Anti-Fouling	Strongest marker (pass)
Yellowness Index	≤ 2
Mechanical Performance
Tensile Strength	≥ 360 kg/cm²
Elongation at Break	≥ 350%
Peel Strength	≥ 75 N/cm
Shrinkage (MD)	≤ 0.5 mm
Shrinkage (TD)	≤ 0.4 mm
Material Structure
Total Thickness	180 ± 5 μm
TPU Layer Thickness	150 ± 5 μm
Coating Thickness	10 ± 5 μm
Adhesive Thickness	20 ± 5 μm
Liner Thickness	75 ± 5 μm
Layer Thickness	50 ± 5 μm
Finished Weight	375–395 g/m²
Glue Weight	25–30 g/m²
Appearance Quality
Liner Bubbles	Visually invisible
Dust	Visually invisible
Coated Dump	Visually invisible
Glue Line	Visually invisible
Crystal Points (12.7 × 12.7 cm) – 0.1–0.6 mm	Allowed
Crystal Points (12.7 × 12.7 cm) – 0.7–2.9 mm	< 10
Crystal Points (12.7 × 12.7 cm) – ≥ 3.0 mm	1 max
Adhesion System
Adhesive Type	Optically clear acrylic PSA
Tack	≥ 9 N / 25 mm
24h, 180° Peel	≥ 18 N / 25 mm
Release Force	≤ 0.35 N / 25 mm
Thermal Resistance
Maximum Temperature	120°C (≥ 5 min)
Self-Repair Activation Range	60–80°C
Self-Repair Technology
Self-Healing	Heat 75°C, 0.1 mm (Brush & Heat)
Chemical Resistance
Acid & Alkali Resistance	PASS
Anti-Acid	Oxalate 72 (pass)
Storage & Warranty
Recommended Storage	22°C ± 2°C \| 40–60% RH \| store upright in original packaging, away from UV & heat
Shelf Life	12 months (stored upright in original packaging at 15–25°C and ~50% RH)
Material Warranty	10-year material warranty
Warranty Coverage	Yellowing protection, crack & blister coverage, delamination protection, adhesive failure protection

Ochranný balík

Precíznosť zvonku. Inovácia zvnútra. Štruktúrované tak, aby sa zachovala integrita fólie počas manipulácie a pohybu. Navrhnuté tak, aby sa znížilo zbytočné namáhanie, ohýbanie a vystavenie povrchu pred aplikáciou.

Navrhnuté tak, aby podporovali stabilnú prepravu, čistú manipuláciu a presné podmienky inštalácie.

Aplikácia a inštalácia

Nexthor™ Paint Protection Film is manufactured from premium American and German raw materials and engineered for maximum tensile strength, optical clarity, and controlled elasticity at optimized thickness. Correct installation ensures full adhesive activation, structural integrity, and long-term performance.

Professional Requirements

Installation must be performed in a controlled, dust-free environment using professional-grade tools. Surface contamination, improper slip ratios, or uncontrolled heat application may compromise adhesion performance.

Professional PPF squeegee (multi-hardness)
Precision blade system
Lint-free microfiber system
Distilled water only
Heat control equipment

Installation Methodology

Nexthor™ PPF is designed for precision wet application using controlled alignment, calibrated slip ratios, and structured adhesive activation. The following methodology ensures optimal bonding strength, visual clarity, and long-term durability.

1. Surface Conditioning

Vehicle surface must be fully decontaminated and panel temperature stabilized. Final wipe with isopropyl alcohol solution is mandatory. Surface must be clean, dry, oil-free, and dust-free.

2. Slip Formula

Recommended ratio: 1L distilled water + 2–4 drops pure baby shampoo. Mix gently to maintain low-foam consistency. No conditioners, waxes, or silicone-based additives permitted.

3. Film Positioning

Apply slip solution to both surface and adhesive layer. Position film under controlled tension. Maintain alignment with body lines and structural reference points.

4. Adhesive Activation

Execute center-out squeegee passes with overlapping pressure lines. All fluid must be evacuated to achieve full adhesive contact. Edges must be secured using controlled pressure and temperature. Avoid overheating.

5. Curing Phase

Initial bond stabilization: 24 hours.
Complete adhesive cure: 7–30 days depending on climate conditions.

During curing:
No washing for 48 hours.
No high-pressure exposure for 7 days.
Temporary moisture pockets may appear and will dissipate naturally.

Maintenance & Care

Nexthor™ PPF incorporates advanced self-healing elastomer technology activated by thermal energy. Wash with pH-neutral automotive shampoo only. Avoid abrasive tools and aggressive chemical exposure. Professional installation is strongly recommended for complex geometries and high-tension panels.

For the complete step-by-step documentation, technical notes, and extended installer guidance, please review the full Installation Guide:
View Full Nexthor™ Installation Guide

Nexthor™ | SKU: H-022-15m