Ochranná fólia laku Nexthor Aegis™

White Diamond Purple Glossy SelfRepair Nano-Coated PPF

€1.799,00

Farba: White Diamond Purple

Dĺžka

15 m 17 m 20 m 30 m

Variácie

Šírka: 1,52 m

Popis

White Diamond Purple Glossy PPF zastavuje kamienky a škrabance

Táto 7,5 mil fólia na ochranu laku chráni vaše vozidlo pred odštiepenými kamienkami, úlomkami z ciest, postriekaním hmyzom a UV poškodením. Lesklý biely povrch s fialovými podtónmi chráni svetlé farby laku a zároveň pridáva dimenzionálny farebný posun. White Diamond Purple Glossy PPF absorbuje nárazy, ktoré by inak poškodili alebo poškriabali váš pôvodný lak. Konštrukcia z TPU fólie sa pod nárazom ohýba a rozptyľuje energiu po povrchu. Nainštalujte ju na vysokoexponované miesta, ako sú kapoty, blatníky, nárazníky a zrkadlá, aby ste zachovali hodnotu vozidla pri ďalšom predaji a udržali ho v bezchybnom stave.

Technológia SelfRepair™ odstraňuje kruhové škrabance a ľahké škrabance

Vrchná vrstva Nexthor SelfRepair™ eliminuje drobné škrabance a kruhové škrabance aktiváciou teplom. Zaparkujte na slnku alebo prelejte fóliu teplou vodou a povrchové poškodenia zmiznú v priebehu niekoľkých minút. Táto samoliečiaca fólia na ochranu laku udržuje lesklý biely povrch ako nový aj po rokoch jazdenia. Ľahké škrabance od umývačiek áut, nechtov alebo cestnej špiny zmiznú bez leštenia alebo brúsenia. Farebná PPF si zachováva svoju čírosť a lesk bez náročnej údržby, ktorá je potrebná pri tradičných čírych ochranných fóliách.

Hydrofilný nano povlak AquaGuard™ a lepidlo BondGrip™

Nemecky navrhnutý hydrofilný nano povlak AquaGuard™ rozptyľuje vodu na tenké vrstvy, ktoré odvádzajú špinu a nečistoty z povrchu. Tento hydrofilný povlak nevyžaduje opätovnú aplikáciu a zostáva aktívny po celú dobu životnosti fólie. Lepidlo Nexthor BondGrip™ z USA pevne prichytí fóliu k laku bez zvyškov alebo poškodenia laku pri odstraňovaní. Celý systém je dodávaný s 10-ročnou zárukou pokrývajúcou žltnutie, praskanie a odlupovanie. Hydrofóbny povlak je k dispozícii na požiadanie, ak preferujete perličkovanie vody.

Objednajte si White Diamond Purple Glossy SelfRepair Nano-Coated PPF ešte dnes a ochráňte svoje auto farebnou ochrannou fóliou na lak, ktorá sa sama hojí a zostáva čistá.

Farba a efekt

White Diamond Purple combines a pure white base with subtle purple undertones that emerge under direct sunlight. The glossy finish reflects light with crystal clarity, creating a dimensional effect that shifts between bright white and soft violet depending on viewing angle. Under overcast skies or in shade, the film reads as a clean, glossy white with just a whisper of color. In full sun, the purple tones activate and catch the eye with a sophisticated shimmer.

The effect is restrained and elegant, never garish. The glossy surface amplifies light reflection and creates wet-look shine that enhances body lines. This color works beautifully on light-colored vehicles where the purple accent adds depth without overwhelming the original paint.

White Diamond Purple works particularly well on hoods, fenders, and mirrors where the color shift can be appreciated as you walk around the vehicle. The purple shimmer becomes more pronounced at angle changes, creating visual interest that transforms as light conditions change throughout the day.

Výkon a ochrana

Performance & Protection

Nexthor™ PPF is engineered as a next-generation multilayer aliphatic TPU protection system optimized for impact resistance, optical clarity, and controlled elasticity at optimized thickness.

Multilayer Architecture
Nano-Coating	Hydrophilic surface layer engineered for long-term optical stability.
Self-Healing Topcoat	Heat-activated surface recovery designed for daily-use micro-marring.
Aliphatic TPU Core	High-strength core engineered for impact resistance and stretch stability.
Acrylic PSA Adhesive	Optically clear pressure-sensitive adhesive for controlled tack and edge hold.
Double-Matte Release Liner	Controlled release and dimensional stability during installation.

Core Performance Targets
Optical clarity	Engineered for a clean, distortion-minimized finish under real-world lighting.
Impact resistance	Designed to absorb and disperse stone-strike energy through the TPU core.
Elastic control	Balanced conformability for complex panels with stable shrink behavior.
Hydrophobic top surface	Low surface energy to reduce contamination bonding and improve washability.
Self-repair response	Heat-responsive polymer memory restores surface from light micro-scratches.

Warranty Coverage (Material)
Term	10-year material warranty
Coverage	Yellowing protection · crack & blister coverage · delamination protection · adhesive failure protection

For full measured values and tolerances, use the Technical Specifications tab.

Technické špecifikácie

Nexthor™ Paint Protection Film – Technical Specifications (AEGIS™ Mk I – 7.5 mil)
Optical & Surface
Gloss (60°)	≥ 94%
Water Contact Angle	≥ 103°
Anti-Fouling	Strongest marker (pass)
Yellowness Index	≤ 2
Mechanical Performance
Tensile Strength	≥ 360 kg/cm²
Elongation at Break	≥ 350%
Peel Strength	≥ 75 N/cm
Shrinkage (MD)	≤ 0.5 mm
Shrinkage (TD)	≤ 0.4 mm
Material Structure
Total Thickness	180 ± 5 μm
TPU Layer Thickness	150 ± 5 μm
Coating Thickness	10 ± 5 μm
Adhesive Thickness	20 ± 5 μm
Liner Thickness	75 ± 5 μm
Layer Thickness	50 ± 5 μm
Finished Weight	375–395 g/m²
Glue Weight	25–30 g/m²
Appearance Quality
Liner Bubbles	Visually invisible
Dust	Visually invisible
Coated Dump	Visually invisible
Glue Line	Visually invisible
Crystal Points (12.7 × 12.7 cm) – 0.1–0.6 mm	Allowed
Crystal Points (12.7 × 12.7 cm) – 0.7–2.9 mm	< 10
Crystal Points (12.7 × 12.7 cm) – ≥ 3.0 mm	1 max
Adhesion System
Adhesive Type	Optically clear acrylic PSA
Tack	≥ 9 N / 25 mm
24h, 180° Peel	≥ 18 N / 25 mm
Release Force	≤ 0.35 N / 25 mm
Thermal Resistance
Maximum Temperature	120°C (≥ 5 min)
Self-Repair Activation Range	60–80°C
Self-Repair Technology
Self-Healing	Heat 75°C, 0.1 mm (Brush & Heat)
Chemical Resistance
Acid & Alkali Resistance	PASS
Anti-Acid	Oxalate 72 (pass)
Storage & Warranty
Recommended Storage	22°C ± 2°C \| 40–60% RH \| store upright in original packaging, away from UV & heat
Shelf Life	12 months (stored upright in original packaging at 15–25°C and ~50% RH)
Material Warranty	10-year material warranty
Warranty Coverage	Yellowing protection, crack & blister coverage, delamination protection, adhesive failure protection

Ochranný balík

Precíznosť zvonku. Inovácia zvnútra. Štruktúrované tak, aby sa zachovala integrita fólie počas manipulácie a pohybu. Navrhnuté tak, aby sa znížilo zbytočné namáhanie, ohýbanie a vystavenie povrchu pred aplikáciou.

Navrhnuté tak, aby podporovali stabilnú prepravu, čistú manipuláciu a presné podmienky inštalácie.

Aplikácia a inštalácia

Nexthor™ Paint Protection Film is manufactured from premium American and German raw materials and engineered for maximum tensile strength, optical clarity, and controlled elasticity at optimized thickness. Correct installation ensures full adhesive activation, structural integrity, and long-term performance.

Professional Requirements

Installation must be performed in a controlled, dust-free environment using professional-grade tools. Surface contamination, improper slip ratios, or uncontrolled heat application may compromise adhesion performance.

Professional PPF squeegee (multi-hardness)
Precision blade system
Lint-free microfiber system
Distilled water only
Heat control equipment

Installation Methodology

Nexthor™ PPF is designed for precision wet application using controlled alignment, calibrated slip ratios, and structured adhesive activation. The following methodology ensures optimal bonding strength, visual clarity, and long-term durability.

1. Surface Conditioning

Vehicle surface must be fully decontaminated and panel temperature stabilized. Final wipe with isopropyl alcohol solution is mandatory. Surface must be clean, dry, oil-free, and dust-free.

2. Slip Formula

Recommended ratio: 1L distilled water + 2–4 drops pure baby shampoo. Mix gently to maintain low-foam consistency. No conditioners, waxes, or silicone-based additives permitted.

3. Film Positioning

Apply slip solution to both surface and adhesive layer. Position film under controlled tension. Maintain alignment with body lines and structural reference points.

4. Adhesive Activation

Execute center-out squeegee passes with overlapping pressure lines. All fluid must be evacuated to achieve full adhesive contact. Edges must be secured using controlled pressure and temperature. Avoid overheating.

5. Curing Phase

Initial bond stabilization: 24 hours.
Complete adhesive cure: 7–30 days depending on climate conditions.

During curing:
No washing for 48 hours.
No high-pressure exposure for 7 days.
Temporary moisture pockets may appear and will dissipate naturally.

Maintenance & Care

Nexthor™ PPF incorporates advanced self-healing elastomer technology activated by thermal energy. Wash with pH-neutral automotive shampoo only. Avoid abrasive tools and aggressive chemical exposure. Professional installation is strongly recommended for complex geometries and high-tension panels.

For the complete step-by-step documentation, technical notes, and extended installer guidance, please review the full Installation Guide:
View Full Nexthor™ Installation Guide

Nexthor™ | SKU: H-038-15m