Ochranná fólia laku Nexthor Aegis™

Magic Black to Red Charm Glossy SelfRepair Nano-Coated PPF

€1.799,00

Farba: Magic Black to Red

Dĺžka

15 m 17 m 20 m 30 m

Variácie

Šírka: 1,52 m

Popis

Čierna lesklá ochranná fólia na lak, ktorá mení farbu na červenú

Vaše auto čelí každý deň neúprosným hrozbám. Kamienky, úlomky z cesty, škrabance a UV poškodenie útočia na váš lak zo všetkých uhlov. Ochranná fólia na lak Magic Black to Red Charm Glossy vytvára 7,5 mil bariéru medzi vaším lakom a svetom. Táto farebná PPF absorbuje nárazy, ktoré by inak trvalo poškodili váš lak, zatiaľ čo lesklý povrch zachováva hlboký, reflexný lesk, ktorý si vaše auto zaslúži. TPU konštrukcia fólie sa pri náraze prehne a rozptýli energiu po svojom povrchu namiesto toho, aby ju preniesla na váš bezfarebný lak.

Technológia SelfRepair vymaže drobné poškodenia

Jemné škrabance a kruhové stopy zmiznú samy od seba. Vrchná vrstva Nexthor SelfRepair™ využíva teplom aktivované polyméry, ktoré sa vracajú na svoje miesto pri vystavení teplým teplotám. Zaparkujte na slnku alebo prelejte povrch teplou vodou a samoregeneračná ochranná fólia na lak sa obnoví do hladkého, nepoškodeného stavu. Toto nie je dočasná oprava. Samoregeneračné vlastnosti vydržia po celú životnosť fólie, vďaka čomu bude vaša čierna PPF vyzerať sviežo rok čo rok.

Hydrofilný povlak a lepidlo vyrobené v USA

Hydrofilný nanopovlak Nexthor AquaGuard™ rozprestiera vodu do tenkých vrstiev, ktoré sa zošmykujú z vášho auta a odnášajú so sebou nečistoty a kontaminanty. Tento nemecký povrch zostáva čistejší medzi umývaním a nikdy nepotrebuje opätovnú aplikáciu. Lepidlo Nexthor BondGrip™, vyrobené v USA, vytvára trvalé spojenie, ktoré sa neodlepí, nezožltne ani nezlyhá. Každá rolka je krytá 10-ročnou zárukou pokrývajúcou zlyhanie lepidla, žltnutie, praskanie a delamináciu.

Objednajte si Magic Black to Red Charm Glossy Samoregeneračnú Nanopovlakovanú PPF ešte dnes a ochráňte svoje auto samoregeneračnou ochrannou fóliou na lak, ktorá mení farbu na svetle.

Farba a efekt

Tento film začína ako hlboká, zrkadlová čierna pri priamom svetle a neutrálnych pozorovacích uhloch. Lesklý povrch odráža okolie s rovnakou intenzitou ako továrenský číry lak, čím vytvára hĺbku s „mokrým vzhľadom“, ktorou sú prémiové čierne autá známe.

Zmeňte svoj uhol alebo zachyťte svetlo pod uhlom 30 až 60 stupňov a z čierneho základu vystúpia červené tóny. Efekt je jemný a sofistikovaný. Línie karosérie žiaria karmínovými odleskami, zatiaľ čo ploché panely si zachovávajú svoju čiernu hĺbku. Farebný posun sa zintenzívňuje, keď krivky zachytávajú slnko, čím sa vytvára dynamický kontrast medzi tieňom a osvetlenými povrchmi.

Lesklý povrch zosilňuje posun. Odrazy zostávajú ostré a čisté, zatiaľ čo červený podtón dodáva teplo tomu, čo by inak bolo studenou, neutrálnou čiernou. V zamračených podmienkach sa film javí ako čisto čierny. Pod priamym slnečným svetlom alebo pouličnými lampami sa červené čaro prejavuje vo vlnách po kapote, blatníkoch a dverách.

Výkon a ochrana

Performance & Protection

Nexthor™ PPF is engineered as a next-generation multilayer aliphatic TPU protection system optimized for impact resistance, optical clarity, and controlled elasticity at optimized thickness.

Multilayer Architecture
Nano-Coating	Hydrophilic surface layer engineered for long-term optical stability.
Self-Healing Topcoat	Heat-activated surface recovery designed for daily-use micro-marring.
Aliphatic TPU Core	High-strength core engineered for impact resistance and stretch stability.
Acrylic PSA Adhesive	Optically clear pressure-sensitive adhesive for controlled tack and edge hold.
Double-Matte Release Liner	Controlled release and dimensional stability during installation.

Core Performance Targets
Optical clarity	Engineered for a clean, distortion-minimized finish under real-world lighting.
Impact resistance	Designed to absorb and disperse stone-strike energy through the TPU core.
Elastic control	Balanced conformability for complex panels with stable shrink behavior.
Hydrophobic top surface	Low surface energy to reduce contamination bonding and improve washability.
Self-repair response	Heat-responsive polymer memory restores surface from light micro-scratches.

Warranty Coverage (Material)
Term	10-year material warranty
Coverage	Yellowing protection · crack & blister coverage · delamination protection · adhesive failure protection

For full measured values and tolerances, use the Technical Specifications tab.

Technické špecifikácie

Nexthor™ Paint Protection Film – Technical Specifications (AEGIS™ Mk I – 7.5 mil)
Optical & Surface
Gloss (60°)	≥ 94%
Water Contact Angle	≥ 103°
Anti-Fouling	Strongest marker (pass)
Yellowness Index	≤ 2
Mechanical Performance
Tensile Strength	≥ 360 kg/cm²
Elongation at Break	≥ 350%
Peel Strength	≥ 75 N/cm
Shrinkage (MD)	≤ 0.5 mm
Shrinkage (TD)	≤ 0.4 mm
Material Structure
Total Thickness	180 ± 5 μm
TPU Layer Thickness	150 ± 5 μm
Coating Thickness	10 ± 5 μm
Adhesive Thickness	20 ± 5 μm
Liner Thickness	75 ± 5 μm
Layer Thickness	50 ± 5 μm
Finished Weight	375–395 g/m²
Glue Weight	25–30 g/m²
Appearance Quality
Liner Bubbles	Visually invisible
Dust	Visually invisible
Coated Dump	Visually invisible
Glue Line	Visually invisible
Crystal Points (12.7 × 12.7 cm) – 0.1–0.6 mm	Allowed
Crystal Points (12.7 × 12.7 cm) – 0.7–2.9 mm	< 10
Crystal Points (12.7 × 12.7 cm) – ≥ 3.0 mm	1 max
Adhesion System
Adhesive Type	Optically clear acrylic PSA
Tack	≥ 9 N / 25 mm
24h, 180° Peel	≥ 18 N / 25 mm
Release Force	≤ 0.35 N / 25 mm
Thermal Resistance
Maximum Temperature	120°C (≥ 5 min)
Self-Repair Activation Range	60–80°C
Self-Repair Technology
Self-Healing	Heat 75°C, 0.1 mm (Brush & Heat)
Chemical Resistance
Acid & Alkali Resistance	PASS
Anti-Acid	Oxalate 72 (pass)
Storage & Warranty
Recommended Storage	22°C ± 2°C \| 40–60% RH \| store upright in original packaging, away from UV & heat
Shelf Life	12 months (stored upright in original packaging at 15–25°C and ~50% RH)
Material Warranty	10-year material warranty
Warranty Coverage	Yellowing protection, crack & blister coverage, delamination protection, adhesive failure protection

Ochranný balík

Precíznosť zvonku. Inovácia zvnútra. Štruktúrované tak, aby sa zachovala integrita fólie počas manipulácie a pohybu. Navrhnuté tak, aby sa znížilo zbytočné namáhanie, ohýbanie a vystavenie povrchu pred aplikáciou.

Navrhnuté tak, aby podporovali stabilnú prepravu, čistú manipuláciu a presné podmienky inštalácie.

Aplikácia a inštalácia

Nexthor™ Paint Protection Film is manufactured from premium American and German raw materials and engineered for maximum tensile strength, optical clarity, and controlled elasticity at optimized thickness. Correct installation ensures full adhesive activation, structural integrity, and long-term performance.

Professional Requirements

Installation must be performed in a controlled, dust-free environment using professional-grade tools. Surface contamination, improper slip ratios, or uncontrolled heat application may compromise adhesion performance.

Professional PPF squeegee (multi-hardness)
Precision blade system
Lint-free microfiber system
Distilled water only
Heat control equipment

Installation Methodology

Nexthor™ PPF is designed for precision wet application using controlled alignment, calibrated slip ratios, and structured adhesive activation. The following methodology ensures optimal bonding strength, visual clarity, and long-term durability.

1. Surface Conditioning

Vehicle surface must be fully decontaminated and panel temperature stabilized. Final wipe with isopropyl alcohol solution is mandatory. Surface must be clean, dry, oil-free, and dust-free.

2. Slip Formula

Recommended ratio: 1L distilled water + 2–4 drops pure baby shampoo. Mix gently to maintain low-foam consistency. No conditioners, waxes, or silicone-based additives permitted.

3. Film Positioning

Apply slip solution to both surface and adhesive layer. Position film under controlled tension. Maintain alignment with body lines and structural reference points.

4. Adhesive Activation

Execute center-out squeegee passes with overlapping pressure lines. All fluid must be evacuated to achieve full adhesive contact. Edges must be secured using controlled pressure and temperature. Avoid overheating.

5. Curing Phase

Initial bond stabilization: 24 hours.
Complete adhesive cure: 7–30 days depending on climate conditions.

During curing:
No washing for 48 hours.
No high-pressure exposure for 7 days.
Temporary moisture pockets may appear and will dissipate naturally.

Maintenance & Care

Nexthor™ PPF incorporates advanced self-healing elastomer technology activated by thermal energy. Wash with pH-neutral automotive shampoo only. Avoid abrasive tools and aggressive chemical exposure. Professional installation is strongly recommended for complex geometries and high-tension panels.

For the complete step-by-step documentation, technical notes, and extended installer guidance, please review the full Installation Guide:
View Full Nexthor™ Installation Guide

Nexthor™ | SKU: H-090-15m