Ochranná fólia laku Nexthor Aegis™
Racing Yellow Glossy SelfRepair Nano-Coated PPF
Racing Yellow Glossy SelfRepair Nano-Coated PPF - 1,52 x 15 m / Štandardných 7,5 mil (≈190 μm) / Racing Yellow je momentálne vypredaný a bude odoslaný po naskladnení.
Šírka: 1,52 m
Nepodarilo sa načítať dostupnosť osobného odberu
Popis
Popis
Žltá lesklá ochranná fólia proti kamienkom a poškodeniu od ciest
Lak vášho auta čelí neúprosnému náporu kamienkov, úlomkov z cesty, hmyzu a UV žiarenia. Racing Yellow Glossy SelfRepair Nano-Coated PPF vytvára 7,5 mil bariéru medzi vaším lakom a všetkým, čo naň cesta vrhá. Táto samoopravná ochranná fólia na lak absorbuje nárazy, ktoré by inak poškodili alebo poškriabali váš lak, a udržuje tak váš žltý lesklý povrch bezchybný míľu za míľou. TPU fólia zostáva opticky číra, takže vaša farba zostáva živá bez žltnutia alebo zahmlievania v priebehu času.
Technológia SelfRepair™ odstraňuje škrabance a jemné ryhy
Drobné škrabance a ryhy zmiznú samé vďaka technológii vrchného náteru Nexthor SelfRepair™. Keď je povrch fólie poškodený ľahkým oderom, teplo zo slnka alebo teplá voda spustí proces samoopravy. Molekulárna štruktúra sa reformuje, čím sa odstraňuje nedokonalosť a obnovuje sa lesklý povrch. Vaša žltá PPF si zachováva svoj vzhľad ako z showroomu bez neustálej korekcie alebo leštenia.
AquaGuard™ Hydrofilný povlak a lepiaci systém BondGrip™
Hydrofilný nano povlak AquaGuard™ rozprestiera vodu do tenkej vrstvy, ktorá odstraňuje nečistoty a kontaminanty z povrchu, vďaka čomu je každé umývanie rýchlejšie a efektívnejšie. Tento nemecký povlak je podporený 10-ročnou zárukou bez nutnosti opätovnej aplikácie. Lepidlo BondGrip™ z USA pripevní fóliu k vášmu laku silným, odolným úchytom, ktorý sa nebude dvíhať ani odlupovať. Hydrofóbny povlak je k dispozícii na požiadanie pre tých, ktorí preferujú správanie s kvapkami.
Objednajte si Racing Yellow Glossy SelfRepair Nano-Coated PPF ešte dnes a ochráňte svoje auto výraznou, žiarivou žltou farbou.
Farba a efekt
Farba a efekt
Výkon a ochrana
Výkon a ochrana
Performance & Protection
Nexthor™ PPF is engineered as a next-generation multilayer aliphatic TPU protection system optimized for impact resistance, optical clarity, and controlled elasticity at optimized thickness.
| Multilayer Architecture | |
|---|---|
| Nano-Coating | Hydrophilic surface layer engineered for long-term optical stability. |
| Self-Healing Topcoat | Heat-activated surface recovery designed for daily-use micro-marring. |
| Aliphatic TPU Core | High-strength core engineered for impact resistance and stretch stability. |
| Acrylic PSA Adhesive | Optically clear pressure-sensitive adhesive for controlled tack and edge hold. |
| Double-Matte Release Liner | Controlled release and dimensional stability during installation. |
| Core Performance Targets | |
|---|---|
| Optical clarity | Engineered for a clean, distortion-minimized finish under real-world lighting. |
| Impact resistance | Designed to absorb and disperse stone-strike energy through the TPU core. |
| Elastic control | Balanced conformability for complex panels with stable shrink behavior. |
| Hydrophobic top surface | Low surface energy to reduce contamination bonding and improve washability. |
| Self-repair response | Heat-responsive polymer memory restores surface from light micro-scratches. |
| Warranty Coverage (Material) | |
|---|---|
| Term | 10-year material warranty |
| Coverage | Yellowing protection · crack & blister coverage · delamination protection · adhesive failure protection |
For full measured values and tolerances, use the Technical Specifications tab.
Technické špecifikácie
Technické špecifikácie
| Nexthor™ Paint Protection Film – Technical Specifications (AEGIS™ Mk I – 7.5 mil) | |
|---|---|
| Optical & Surface | |
| Gloss (60°) | ≥ 94% |
| Water Contact Angle | ≥ 103° |
| Anti-Fouling | Strongest marker (pass) |
| Yellowness Index | ≤ 2 |
| Mechanical Performance | |
| Tensile Strength | ≥ 360 kg/cm² |
| Elongation at Break | ≥ 350% |
| Peel Strength | ≥ 75 N/cm |
| Shrinkage (MD) | ≤ 0.5 mm |
| Shrinkage (TD) | ≤ 0.4 mm |
| Material Structure | |
| Total Thickness | 180 ± 5 μm |
| TPU Layer Thickness | 150 ± 5 μm |
| Coating Thickness | 10 ± 5 μm |
| Adhesive Thickness | 20 ± 5 μm |
| Liner Thickness | 75 ± 5 μm |
| Layer Thickness | 50 ± 5 μm |
| Finished Weight | 375–395 g/m² |
| Glue Weight | 25–30 g/m² |
| Appearance Quality | |
| Liner Bubbles | Visually invisible |
| Dust | Visually invisible |
| Coated Dump | Visually invisible |
| Glue Line | Visually invisible |
| Crystal Points (12.7 × 12.7 cm) – 0.1–0.6 mm | Allowed |
| Crystal Points (12.7 × 12.7 cm) – 0.7–2.9 mm | < 10 |
| Crystal Points (12.7 × 12.7 cm) – ≥ 3.0 mm | 1 max |
| Adhesion System | |
| Adhesive Type | Optically clear acrylic PSA |
| Tack | ≥ 9 N / 25 mm |
| 24h, 180° Peel | ≥ 18 N / 25 mm |
| Release Force | ≤ 0.35 N / 25 mm |
| Thermal Resistance | |
| Maximum Temperature | 120°C (≥ 5 min) |
| Self-Repair Activation Range | 60–80°C |
| Self-Repair Technology | |
| Self-Healing | Heat 75°C, 0.1 mm (Brush & Heat) |
| Chemical Resistance | |
| Acid & Alkali Resistance | PASS |
| Anti-Acid | Oxalate 72 (pass) |
| Storage & Warranty | |
| Recommended Storage | 22°C ± 2°C | 40–60% RH | store upright in original packaging, away from UV & heat |
| Shelf Life | 12 months (stored upright in original packaging at 15–25°C and ~50% RH) |
| Material Warranty | 10-year material warranty |
| Warranty Coverage | Yellowing protection, crack & blister coverage, delamination protection, adhesive failure protection |
Ochranný balík
Ochranný balík
Precíznosť zvonku. Inovácia zvnútra. Štruktúrované tak, aby sa zachovala integrita fólie počas manipulácie a pohybu. Navrhnuté tak, aby sa znížilo zbytočné namáhanie, ohýbanie a vystavenie povrchu pred aplikáciou.
Navrhnuté tak, aby podporovali stabilnú prepravu, čistú manipuláciu a presné podmienky inštalácie.
Aplikácia a inštalácia
Aplikácia a inštalácia
Nexthor™ Paint Protection Film is manufactured from premium American and German raw materials and engineered for maximum tensile strength, optical clarity, and controlled elasticity at optimized thickness. Correct installation ensures full adhesive activation, structural integrity, and long-term performance.
Professional Requirements
Installation must be performed in a controlled, dust-free environment using professional-grade tools. Surface contamination, improper slip ratios, or uncontrolled heat application may compromise adhesion performance.
- Professional PPF squeegee (multi-hardness)
- Precision blade system
- Lint-free microfiber system
- Distilled water only
- Heat control equipment
Installation Methodology
Nexthor™ PPF is designed for precision wet application using controlled alignment, calibrated slip ratios, and structured adhesive activation. The following methodology ensures optimal bonding strength, visual clarity, and long-term durability.
1. Surface ConditioningVehicle surface must be fully decontaminated and panel temperature stabilized. Final wipe with isopropyl alcohol solution is mandatory. Surface must be clean, dry, oil-free, and dust-free.
2. Slip FormulaRecommended ratio: 1L distilled water + 2–4 drops pure baby shampoo. Mix gently to maintain low-foam consistency. No conditioners, waxes, or silicone-based additives permitted.
3. Film PositioningApply slip solution to both surface and adhesive layer. Position film under controlled tension. Maintain alignment with body lines and structural reference points.
4. Adhesive ActivationExecute center-out squeegee passes with overlapping pressure lines. All fluid must be evacuated to achieve full adhesive contact. Edges must be secured using controlled pressure and temperature. Avoid overheating.
5. Curing Phase
Initial bond stabilization: 24 hours.
Complete adhesive cure: 7–30 days depending on climate conditions.
During curing:
No washing for 48 hours.
No high-pressure exposure for 7 days.
Temporary moisture pockets may appear and will dissipate naturally.
Maintenance & Care
Nexthor™ PPF incorporates advanced self-healing elastomer technology activated by thermal energy. Wash with pH-neutral automotive shampoo only. Avoid abrasive tools and aggressive chemical exposure. Professional installation is strongly recommended for complex geometries and high-tension panels.
For the complete step-by-step documentation, technical notes, and extended installer guidance, please review the full Installation Guide:
View Full Nexthor™ Installation Guide
Racing Yellow Glossy SelfRepair Nano-Coated PPF