Ochranná fólia laku Nexthor Aegis™
Červená Modrá Zelená Chameleon SelfRepair Nano-potiahnutý PPF
Červená Modrá Zelená Chameleon SelfRepair Nano-potiahnutý PPF - 1,52 x 15 m / Štandardných 7,5 mil (≈190 μm) / Red Blue Green je momentálne vypredaný a bude odoslaný po naskladnení.
Width: 1.52 m
Nepodarilo sa načítať dostupnosť osobného odberu
Popis
Popis
Explózia farieb, ktorá žije v pohybe.
Nexthor™ Red Blue Green Chameleon PPF vytvára intenzívny trojfarebný efekt, v ktorom sa plynule prelínajú červenej, modrej a zelenej v závislosti od svetla a uhla pohľadu. Krok okolo vozidla prináša nový vizuálny Každý zážitok – raz športový, inokedy futuristický, inokedy mimoriadne výrazný.
Lesklý povrch zvýrazňuje hĺbku farieb a dodáva karosérii zrkadlový lesk, vďaka čomu pôsobí chameleón ešte dynamickejšie a živšie. Vozidlo sa stáva vizuálnym centrom pozornosti bez toho, aby pôsobilo lacno – práve naopak, efekt je prémiový a technologicky čistý.
Vďaka pokročilej samoliečivej nano technológii dokáže povrch filmu redukovať viditeľnosť jemných škrabancov pôsobenia tepla, čím si zachováva priebežný a vizuálny dokonalý vzhľad.
Film zároveň poskytuje spoľahlivú ochranu pred kamienkami, UV žiarením, oxidáciou, chemickými nečistotami, cestnou špinou a poveternostnými vplyvmi . Hydrofóbna povrchová vrstva udržiavanie a pomáha zvyšovať hladinu farebného efektu.
Vysoká flexibilita umožňuje presnú aplikáciu aj na príliš tvary karosérie. Air-release zabezpečuje zaistenie a bezbublinovú aplikáciu.
Čím je Red Blue Green Chameleon výnimočný:
-
Dynamický farebný prechod medzi červenou, modrou a zelenou
-
Silný chameleón efekt pri každom pohybe
-
Vysoký lesk s futuristickým a prémiovým vzhľadom
-
Samoliečivá PPF technológia aktivovaná teplom
-
Ochrana pred škrabancami, kamienkami a UV žiarením
-
Hydrofóbny povrch pre jednoduchšiu údržbu
-
Profesionálny farebný PPF fólie pre top aplikácie
Ideálne použitie:
-
Celopolepy predvádzajú automobily a mimoriadne výrazných projektov
-
Tuning buildy a vozidlá, ktoré majú byť neprehliadnuteľné
-
Životný štýl a dizajnové autá
-
Pre vodičov, ktorí chcú najviac originálu bez kompromisov
Výkon a ochrana
Výkon a ochrana
Performance & Protection
Nexthor™ PPF is engineered as a next-generation multilayer aliphatic TPU protection system optimized for impact resistance, optical clarity, and controlled elasticity at optimized thickness.
| Multilayer Architecture | |
|---|---|
| Nano-Coating | Hydrophilic surface layer engineered for long-term optical stability. |
| Self-Healing Topcoat | Heat-activated surface recovery designed for daily-use micro-marring. |
| Aliphatic TPU Core | High-strength core engineered for impact resistance and stretch stability. |
| Acrylic PSA Adhesive | Optically clear pressure-sensitive adhesive for controlled tack and edge hold. |
| Double-Matte Release Liner | Controlled release and dimensional stability during installation. |
| Core Performance Targets | |
|---|---|
| Optical clarity | Engineered for a clean, distortion-minimized finish under real-world lighting. |
| Impact resistance | Designed to absorb and disperse stone-strike energy through the TPU core. |
| Elastic control | Balanced conformability for complex panels with stable shrink behavior. |
| Hydrophobic top surface | Low surface energy to reduce contamination bonding and improve washability. |
| Self-repair response | Heat-responsive polymer memory restores surface from light micro-scratches. |
| Warranty Coverage (Material) | |
|---|---|
| Term | 10-year material warranty |
| Coverage | Yellowing protection · crack & blister coverage · delamination protection · adhesive failure protection |
For full measured values and tolerances, use the Technical Specifications tab.
Technické špecifikácie
Technické špecifikácie
| Nexthor™ Paint Protection Film – Technical Specifications (AEGIS™ Mk I – 7.5 mil) | |
|---|---|
| Optical & Surface | |
| Gloss (60°) | ≥ 94% |
| Water Contact Angle | ≥ 103° |
| Anti-Fouling | Strongest marker (pass) |
| Yellowness Index | ≤ 2 |
| Mechanical Performance | |
| Tensile Strength | ≥ 360 kg/cm² |
| Elongation at Break | ≥ 350% |
| Peel Strength | ≥ 75 N/cm |
| Shrinkage (MD) | ≤ 0.5 mm |
| Shrinkage (TD) | ≤ 0.4 mm |
| Material Structure | |
| Total Thickness | 180 ± 5 μm |
| TPU Layer Thickness | 150 ± 5 μm |
| Coating Thickness | 10 ± 5 μm |
| Adhesive Thickness | 20 ± 5 μm |
| Liner Thickness | 75 ± 5 μm |
| Layer Thickness | 50 ± 5 μm |
| Finished Weight | 375–395 g/m² |
| Glue Weight | 25–30 g/m² |
| Appearance Quality | |
| Liner Bubbles | Visually invisible |
| Dust | Visually invisible |
| Coated Dump | Visually invisible |
| Glue Line | Visually invisible |
| Crystal Points (12.7 × 12.7 cm) – 0.1–0.6 mm | Allowed |
| Crystal Points (12.7 × 12.7 cm) – 0.7–2.9 mm | < 10 |
| Crystal Points (12.7 × 12.7 cm) – ≥ 3.0 mm | 1 max |
| Adhesion System | |
| Adhesive Type | Optically clear acrylic PSA |
| Tack | ≥ 9 N / 25 mm |
| 24h, 180° Peel | ≥ 18 N / 25 mm |
| Release Force | ≤ 0.35 N / 25 mm |
| Thermal Resistance | |
| Maximum Temperature | 120°C (≥ 5 min) |
| Self-Repair Activation Range | 60–80°C |
| Self-Repair Technology | |
| Self-Healing | Heat 75°C, 0.1 mm (Brush & Heat) |
| Chemical Resistance | |
| Acid & Alkali Resistance | PASS |
| Anti-Acid | Oxalate 72 (pass) |
| Storage & Warranty | |
| Recommended Storage | 22°C ± 2°C | 40–60% RH | store upright in original packaging, away from UV & heat |
| Shelf Life | 12 months (stored upright in original packaging at 15–25°C and ~50% RH) |
| Material Warranty | 10-year material warranty |
| Warranty Coverage | Yellowing protection, crack & blister coverage, delamination protection, adhesive failure protection |
Protection Package
Protection Package
Precision outside. Innovation inside. Structured to maintain film integrity during handling and movement. Designed to reduce unnecessary stress, bending, and surface exposure before application.
Engineered to support stable transport, clean handling, and precise installation conditions.
Aplikácia a inštalácia
Aplikácia a inštalácia
Nexthor™ Paint Protection Film is manufactured from premium American and German raw materials and engineered for maximum tensile strength, optical clarity, and controlled elasticity at optimized thickness. Correct installation ensures full adhesive activation, structural integrity, and long-term performance.
Professional Requirements
Installation must be performed in a controlled, dust-free environment using professional-grade tools. Surface contamination, improper slip ratios, or uncontrolled heat application may compromise adhesion performance.
- Professional PPF squeegee (multi-hardness)
- Precision blade system
- Lint-free microfiber system
- Distilled water only
- Heat control equipment
Installation Methodology
Nexthor™ PPF is designed for precision wet application using controlled alignment, calibrated slip ratios, and structured adhesive activation. The following methodology ensures optimal bonding strength, visual clarity, and long-term durability.
1. Surface ConditioningVehicle surface must be fully decontaminated and panel temperature stabilized. Final wipe with isopropyl alcohol solution is mandatory. Surface must be clean, dry, oil-free, and dust-free.
2. Slip FormulaRecommended ratio: 1L distilled water + 2–4 drops pure baby shampoo. Mix gently to maintain low-foam consistency. No conditioners, waxes, or silicone-based additives permitted.
3. Film PositioningApply slip solution to both surface and adhesive layer. Position film under controlled tension. Maintain alignment with body lines and structural reference points.
4. Adhesive ActivationExecute center-out squeegee passes with overlapping pressure lines. All fluid must be evacuated to achieve full adhesive contact. Edges must be secured using controlled pressure and temperature. Avoid overheating.
5. Curing Phase
Initial bond stabilization: 24 hours.
Complete adhesive cure: 7–30 days depending on climate conditions.
During curing:
No washing for 48 hours.
No high-pressure exposure for 7 days.
Temporary moisture pockets may appear and will dissipate naturally.
Maintenance & Care
Nexthor™ PPF incorporates advanced self-healing elastomer technology activated by thermal energy. Wash with pH-neutral automotive shampoo only. Avoid abrasive tools and aggressive chemical exposure. Professional installation is strongly recommended for complex geometries and high-tension panels.
For the complete step-by-step documentation, technical notes, and extended installer guidance, please review the full Installation Guide:
View Full Nexthor™ Installation Guide
Červená Modrá Zelená Chameleon SelfRepair Nano-potiahnutý PPF